Merge

jdk/src/share/classes/java/io/ByteArrayInputStream.java

@@ -275,7 +275,6 @@ class ByteArrayInputStream extends InputStream {
      * Closing a <tt>ByteArrayInputStream</tt> has no effect. The methods in
      * this class can be called after the stream has been closed without
      * generating an <tt>IOException</tt>.
-     * <p>
      */
     public void close() throws IOException {
     }

jdk/src/share/classes/java/io/ByteArrayOutputStream.java

@@ -263,8 +263,6 @@ public class ByteArrayOutputStream extends OutputStream {
      * Closing a <tt>ByteArrayOutputStream</tt> has no effect. The methods in
      * this class can be called after the stream has been closed without
      * generating an <tt>IOException</tt>.
-     * <p>
-     *
      */
     public void close() throws IOException {
     }

jdk/src/share/classes/java/io/DataInput.java

@@ -155,7 +155,7 @@ interface DataInput {
      * to the length of {@code b}.
      * <p>
      * This method blocks until one of the
-     * following conditions occurs:<p>
+     * following conditions occurs:
      * <ul>
      * <li>{@code b.length}
      * bytes of input data are available, in which
@@ -197,7 +197,7 @@ interface DataInput {
      * <p>
      * This method
      * blocks until one of the following conditions
-     * occurs:<p>
+     * occurs:
      * <ul>
      * <li>{@code len} bytes
      * of input data are available, in which case
@@ -316,8 +316,8 @@ interface DataInput {
      * be the second byte. The value
      * returned
      * is:
-     * <p><pre><code>(short)((a &lt;&lt; 8) | (b &amp; 0xff))
+     * <pre>{@code (short)((a << 8) | (b & 0xff))
-     * </code></pre>
+     * }</pre>
      * This method
      * is suitable for reading the bytes written
      * by the {@code writeShort} method of
@@ -337,8 +337,8 @@ interface DataInput {
      * be the first byte read and
      * {@code b}
      * be the second byte. The value returned is:
-     * <p><pre><code>(((a &amp; 0xff) &lt;&lt; 8) | (b &amp; 0xff))
+     * <pre>{@code (((a & 0xff) << 8) | (b & 0xff))
-     * </code></pre>
+     * }</pre>
      * This method is suitable for reading the bytes
      * written by the {@code writeShort} method
      * of interface {@code DataOutput}  if
@@ -359,8 +359,8 @@ interface DataInput {
      * be the first byte read and {@code b}
      * be the second byte. The value
      * returned is:
-     * <p><pre><code>(char)((a &lt;&lt; 8) | (b &amp; 0xff))
+     * <pre>{@code (char)((a << 8) | (b & 0xff))
-     * </code></pre>
+     * }</pre>
      * This method
      * is suitable for reading bytes written by
      * the {@code writeChar} method of interface
@@ -377,10 +377,10 @@ interface DataInput {
      * Reads four input bytes and returns an
      * {@code int} value. Let {@code a-d}
      * be the first through fourth bytes read. The value returned is:
-     * <p><pre><code>
+     * <pre>{@code
-     * (((a &amp; 0xff) &lt;&lt; 24) | ((b &amp; 0xff) &lt;&lt; 16) |
+     * (((a & 0xff) << 24) | ((b & 0xff) << 16) |
-     * &#32;((c &amp; 0xff) &lt;&lt; 8) | (d &amp; 0xff))
+     *  ((c & 0xff) <<  8) | (d & 0xff))
-     * </code></pre>
+     * }</pre>
      * This method is suitable
      * for reading bytes written by the {@code writeInt}
      * method of interface {@code DataOutput}.
@@ -397,16 +397,16 @@ interface DataInput {
      * a {@code long} value. Let {@code a-h}
      * be the first through eighth bytes read.
      * The value returned is:
-     * <p><pre><code>
+     * <pre>{@code
-     * (((long)(a &amp; 0xff) &lt;&lt; 56) |
+     * (((long)(a & 0xff) << 56) |
-     *  ((long)(b &amp; 0xff) &lt;&lt; 48) |
+     *  ((long)(b & 0xff) << 48) |
-     *  ((long)(c &amp; 0xff) &lt;&lt; 40) |
+     *  ((long)(c & 0xff) << 40) |
-     *  ((long)(d &amp; 0xff) &lt;&lt; 32) |
+     *  ((long)(d & 0xff) << 32) |
-     *  ((long)(e &amp; 0xff) &lt;&lt; 24) |
+     *  ((long)(e & 0xff) << 24) |
-     *  ((long)(f &amp; 0xff) &lt;&lt; 16) |
+     *  ((long)(f & 0xff) << 16) |
-     *  ((long)(g &amp; 0xff) &lt;&lt;  8) |
+     *  ((long)(g & 0xff) <<  8) |
-     *  ((long)(h &amp; 0xff)))
+     *  ((long)(h & 0xff)))
-     * </code></pre>
+     * }</pre>
      * <p>
      * This method is suitable
      * for reading bytes written by the {@code writeLong}
@@ -540,9 +540,9 @@ interface DataInput {
      * not match the bit pattern {@code 10xxxxxx},
      * then a {@code UTFDataFormatException}
      * is thrown. Otherwise, the group is converted
-     * to the character:<p>
+     * to the character:
-     * <pre><code>(char)(((a&amp; 0x1F) &lt;&lt; 6) | (b &amp; 0x3F))
+     * <pre>{@code (char)(((a & 0x1F) << 6) | (b & 0x3F))
-     * </code></pre>
+     * }</pre>
      * If the first byte of a group
      * matches the bit pattern {@code 1110xxxx},
      * then the group consists of that byte {@code a}
@@ -554,10 +554,10 @@ interface DataInput {
      * does not match the bit pattern {@code 10xxxxxx},
      * then a {@code UTFDataFormatException}
      * is thrown. Otherwise, the group is converted
-     * to the character:<p>
+     * to the character:
-     * <pre><code>
+     * <pre>{@code
-     * (char)(((a &amp; 0x0F) &lt;&lt; 12) | ((b &amp; 0x3F) &lt;&lt; 6) | (c &amp; 0x3F))
+     * (char)(((a & 0x0F) << 12) | ((b & 0x3F) << 6) | (c & 0x3F))
-     * </code></pre>
+     * }</pre>
      * If the first byte of a group matches the
      * pattern {@code 1111xxxx} or the pattern
      * {@code 10xxxxxx}, then a {@code UTFDataFormatException}

jdk/src/share/classes/java/io/DataOutput.java

@@ -134,11 +134,11 @@ interface DataOutput {
      * Writes two bytes to the output
      * stream to represent the value of the argument.
      * The byte values to be written, in the  order
-     * shown, are: <p>
+     * shown, are:
-     * <pre><code>
+     * <pre>{@code
-     * (byte)(0xff &amp; (v &gt;&gt; 8))
+     * (byte)(0xff & (v >> 8))
-     * (byte)(0xff &amp; v)
+     * (byte)(0xff & v)
-     * </code> </pre> <p>
+     * }</pre> <p>
      * The bytes written by this method may be
      * read by the <code>readShort</code> method
      * of interface <code>DataInput</code> , which
@@ -156,10 +156,10 @@ interface DataOutput {
      * output stream.
      * The byte values to be written, in the  order
      * shown, are:
-     * <p><pre><code>
+     * <pre>{@code
-     * (byte)(0xff &amp; (v &gt;&gt; 8))
+     * (byte)(0xff & (v >> 8))
-     * (byte)(0xff &amp; v)
+     * (byte)(0xff & v)
-     * </code></pre><p>
+     * }</pre><p>
      * The bytes written by this method may be
      * read by the <code>readChar</code> method
      * of interface <code>DataInput</code> , which
@@ -176,12 +176,12 @@ interface DataOutput {
      * comprised of four bytes, to the output stream.
      * The byte values to be written, in the  order
      * shown, are:
-     * <p><pre><code>
+     * <pre>{@code
-     * (byte)(0xff &amp; (v &gt;&gt; 24))
+     * (byte)(0xff & (v >> 24))
-     * (byte)(0xff &amp; (v &gt;&gt; 16))
+     * (byte)(0xff & (v >> 16))
-     * (byte)(0xff &amp; (v &gt;&gt; &#32; &#32;8))
+     * (byte)(0xff & (v >>  8))
-     * (byte)(0xff &amp; v)
+     * (byte)(0xff & v)
-     * </code></pre><p>
+     * }</pre><p>
      * The bytes written by this method may be read
      * by the <code>readInt</code> method of interface
      * <code>DataInput</code> , which will then
@@ -197,16 +197,16 @@ interface DataOutput {
      * comprised of eight bytes, to the output stream.
      * The byte values to be written, in the  order
      * shown, are:
-     * <p><pre><code>
+     * <pre>{@code
-     * (byte)(0xff &amp; (v &gt;&gt; 56))
+     * (byte)(0xff & (v >> 56))
-     * (byte)(0xff &amp; (v &gt;&gt; 48))
+     * (byte)(0xff & (v >> 48))
-     * (byte)(0xff &amp; (v &gt;&gt; 40))
+     * (byte)(0xff & (v >> 40))
-     * (byte)(0xff &amp; (v &gt;&gt; 32))
+     * (byte)(0xff & (v >> 32))
-     * (byte)(0xff &amp; (v &gt;&gt; 24))
+     * (byte)(0xff & (v >> 24))
-     * (byte)(0xff &amp; (v &gt;&gt; 16))
+     * (byte)(0xff & (v >> 16))
-     * (byte)(0xff &amp; (v &gt;&gt;  8))
+     * (byte)(0xff & (v >>  8))
-     * (byte)(0xff &amp; v)
+     * (byte)(0xff & v)
-     * </code></pre><p>
+     * }</pre><p>
      * The bytes written by this method may be
      * read by the <code>readLong</code> method
      * of interface <code>DataInput</code> , which
@@ -314,24 +314,24 @@ interface DataOutput {
      * If a character <code>c</code>
      * is in the range <code>&#92;u0001</code> through
      * <code>&#92;u007f</code>, it is represented
-     * by one byte:<p>
+     * by one byte:
      * <pre>(byte)c </pre>  <p>
      * If a character <code>c</code> is <code>&#92;u0000</code>
      * or is in the range <code>&#92;u0080</code>
      * through <code>&#92;u07ff</code>, then it is
      * represented by two bytes, to be written
-     * in the order shown:<p> <pre><code>
+     * in the order shown: <pre>{@code
-     * (byte)(0xc0 | (0x1f &amp; (c &gt;&gt; 6)))
+     * (byte)(0xc0 | (0x1f & (c >> 6)))
-     * (byte)(0x80 | (0x3f &amp; c))
+     * (byte)(0x80 | (0x3f & c))
-     *  </code></pre>  <p> If a character
+     * }</pre> <p> If a character
      * <code>c</code> is in the range <code>&#92;u0800</code>
      * through <code>uffff</code>, then it is
      * represented by three bytes, to be written
-     * in the order shown:<p> <pre><code>
+     * in the order shown: <pre>{@code
-     * (byte)(0xe0 | (0x0f &amp; (c &gt;&gt; 12)))
+     * (byte)(0xe0 | (0x0f & (c >> 12)))
-     * (byte)(0x80 | (0x3f &amp; (c &gt;&gt;  6)))
+     * (byte)(0x80 | (0x3f & (c >>  6)))
-     * (byte)(0x80 | (0x3f &amp; c))
+     * (byte)(0x80 | (0x3f & c))
-     *  </code></pre>  <p> First,
+     * }</pre>  <p> First,
      * the total number of bytes needed to represent
      * all the characters of <code>s</code> is
      * calculated. If this number is larger than

jdk/src/share/classes/java/io/FilePermission.java

@@ -55,7 +55,7 @@ import sun.security.util.SecurityConstants;
  * a list of one or more comma-separated keywords. The possible keywords are
  * "read", "write", "execute", "delete", and "readlink". Their meaning is
  * defined as follows:
- * <P>
+ *
  * <DL>
  *    <DT> read <DD> read permission
  *    <DT> write <DD> write permission
@@ -297,11 +297,11 @@ public final class FilePermission extends Permission implements Serializable {
     /**
      * Checks if this FilePermission object "implies" the specified permission.
      * <P>
-     * More specifically, this method returns true if:<p>
+     * More specifically, this method returns true if:
      * <ul>
-     * <li> <i>p</i> is an instanceof FilePermission,<p>
+     * <li> <i>p</i> is an instanceof FilePermission,
      * <li> <i>p</i>'s actions are a proper subset of this
-     * object's actions, and <p>
+     * object's actions, and
      * <li> <i>p</i>'s pathname is implied by this object's
      *      pathname. For example, "/tmp/*" implies "/tmp/foo", since
      *      "/tmp/*" encompasses all files in the "/tmp" directory,

jdk/src/share/classes/java/io/InputStream.java

@@ -306,8 +306,7 @@ public abstract class InputStream implements Closeable {
      *
      * <p> The general contract of <code>reset</code> is:
      *
-     * <p><ul>
+     * <ul>
-     *
      * <li> If the method <code>markSupported</code> returns
      * <code>true</code>, then:
      *

jdk/src/share/classes/java/io/ObjectInputStream.java

@@ -109,7 +109,7 @@ import sun.reflect.misc.ReflectUtil;
  *
  * <p>Serializable classes that require special handling during the
  * serialization and deserialization process should implement the following
- * methods:<p>
+ * methods:
  *
  * <pre>
  * private void writeObject(java.io.ObjectOutputStream stream)

jdk/src/share/classes/java/io/PipedInputStream.java

@@ -172,15 +172,14 @@ public class PipedInputStream extends InputStream {
      * unconnected piped output stream and <code>snk</code>
      * is an unconnected piped input stream, they
      * may be connected by either the call:
-     * <p>
+     *
      * <pre><code>snk.connect(src)</code> </pre>
      * <p>
      * or the call:
-     * <p>
+     *
      * <pre><code>src.connect(snk)</code> </pre>
      * <p>
-     * The two
+     * The two calls have the same effect.
-     * calls have the same effect.
      *
      * @param      src   The piped output stream to connect to.
      * @exception  IOException  if an I/O error occurs.

jdk/src/share/classes/java/io/PipedReader.java

@@ -145,15 +145,14 @@ public class PipedReader extends Reader {
      * unconnected piped writer and <code>snk</code>
      * is an unconnected piped reader, they
      * may be connected by either the call:
-     * <p>
+     *
      * <pre><code>snk.connect(src)</code> </pre>
      * <p>
      * or the call:
-     * <p>
+     *
      * <pre><code>src.connect(snk)</code> </pre>
      * <p>
-     * The two
+     * The two calls have the same effect.
-     * calls have the same effect.
      *
      * @param      src   The piped writer to connect to.
      * @exception  IOException  if an I/O error occurs.

jdk/src/share/classes/java/io/RandomAccessFile.java

@@ -784,7 +784,7 @@ public class RandomAccessFile implements DataOutput, DataInput, Closeable {
      * </pre></blockquote>
      * <p>
      * then the result is equal to:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      *     ((long)b1 &lt;&lt; 56) + ((long)b2 &lt;&lt; 48)
      *     + ((long)b3 &lt;&lt; 40) + ((long)b4 &lt;&lt; 32)
      *     + ((long)b5 &lt;&lt; 24) + ((long)b6 &lt;&lt; 16)

jdk/src/share/classes/java/io/Serializable.java

@@ -55,7 +55,7 @@ package java.io;
  *
  * Classes that require special handling during the serialization and
  * deserialization process must implement special methods with these exact
- * signatures: <p>
+ * signatures:
  *
  * <PRE>
  * private void writeObject(java.io.ObjectOutputStream out)
@@ -101,7 +101,7 @@ package java.io;
  *
  * <p>Serializable classes that need to designate an alternative object to be
  * used when writing an object to the stream should implement this
- * special method with the exact signature: <p>
+ * special method with the exact signature:
  *
  * <PRE>
  * ANY-ACCESS-MODIFIER Object writeReplace() throws ObjectStreamException;
@@ -115,7 +115,7 @@ package java.io;
  *
  * Classes that need to designate a replacement when an instance of it
  * is read from the stream should implement this special method with the
- * exact signature.<p>
+ * exact signature.
  *
  * <PRE>
  * ANY-ACCESS-MODIFIER Object readResolve() throws ObjectStreamException;
@@ -133,7 +133,7 @@ package java.io;
  * deserialization will result in an {@link InvalidClassException}.  A
  * serializable class can declare its own serialVersionUID explicitly by
  * declaring a field named <code>"serialVersionUID"</code> that must be static,
- * final, and of type <code>long</code>:<p>
+ * final, and of type <code>long</code>:
  *
  * <PRE>
  * ANY-ACCESS-MODIFIER static final long serialVersionUID = 42L;

jdk/src/share/classes/java/io/SerializablePermission.java

@@ -43,7 +43,6 @@ import java.util.StringTokenizer;
  * The following table lists all the possible SerializablePermission target names,
  * and for each provides a description of what the permission allows
  * and a discussion of the risks of granting code the permission.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="Permission target name, what the permission allows, and associated risks">
  * <tr>

jdk/src/share/classes/java/lang/AbstractStringBuilder.java

@@ -330,9 +330,9 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      * characters to be copied is {@code srcEnd-srcBegin}. The
      * characters are copied into the subarray of {@code dst} starting
      * at index {@code dstBegin} and ending at index:
-     * <p><blockquote><pre>
+     * <pre>{@code
      * dstbegin + (srcEnd-srcBegin) - 1
-     * </pre></blockquote>
+     * }</pre>
      *
      * @param      srcBegin   start copying at this offset.
      * @param      srcEnd     stop copying at this offset.
@@ -859,16 +859,16 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      *
      * <p> An invocation of this method of the form
      *
-     * <blockquote><pre>
+     * <pre>{@code
-     * sb.subSequence(begin,&nbsp;end)</pre></blockquote>
+     * sb.subSequence(begin,&nbsp;end)}</pre>
      *
      * behaves in exactly the same way as the invocation
      *
-     * <blockquote><pre>
+     * <pre>{@code
-     * sb.substring(begin,&nbsp;end)</pre></blockquote>
+     * sb.substring(begin,&nbsp;end)}</pre>
      *
      * This method is provided so that this class can
-     * implement the {@link CharSequence} interface. </p>
+     * implement the {@link CharSequence} interface.
      *
      * @param      start   the start index, inclusive.
      * @param      end     the end index, exclusive.
@@ -1287,9 +1287,9 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      * Returns the index within this string of the first occurrence of the
      * specified substring. The integer returned is the smallest value
      * <i>k</i> such that:
-     * <blockquote><pre>
+     * <pre>{@code
      * this.toString().startsWith(str, <i>k</i>)
-     * </pre></blockquote>
+     * }</pre>
      * is {@code true}.
      *
      * @param   str   any string.
@@ -1306,10 +1306,10 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      * Returns the index within this string of the first occurrence of the
      * specified substring, starting at the specified index.  The integer
      * returned is the smallest value {@code k} for which:
-     * <blockquote><pre>
+     * <pre>{@code
      *     k >= Math.min(fromIndex, this.length()) &&
      *                   this.toString().startsWith(str, k)
-     * </pre></blockquote>
+     * }</pre>
      * If no such value of <i>k</i> exists, then -1 is returned.
      *
      * @param   str         the substring for which to search.
@@ -1326,9 +1326,9 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      * of the specified substring.  The rightmost empty string "" is
      * considered to occur at the index value {@code this.length()}.
      * The returned index is the largest value <i>k</i> such that
-     * <blockquote><pre>
+     * <pre>{@code
      * this.toString().startsWith(str, k)
-     * </pre></blockquote>
+     * }</pre>
      * is true.
      *
      * @param   str   the substring to search for.
@@ -1345,10 +1345,10 @@ abstract class AbstractStringBuilder implements Appendable, CharSequence {
      * Returns the index within this string of the last occurrence of the
      * specified substring. The integer returned is the largest value <i>k</i>
      * such that:
-     * <blockquote><pre>
+     * <pre>{@code
      *     k <= Math.min(fromIndex, this.length()) &&
      *                   this.toString().startsWith(str, k)
-     * </pre></blockquote>
+     * }</pre>
      * If no such value of <i>k</i> exists, then -1 is returned.
      *
      * @param   str         the substring to search for.

jdk/src/share/classes/java/lang/ArrayStoreException.java

@@ -29,7 +29,7 @@ package java.lang;
  * Thrown to indicate that an attempt has been made to store the
  * wrong type of object into an array of objects. For example, the
  * following code generates an <code>ArrayStoreException</code>:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     Object x[] = new String[3];
  *     x[0] = new Integer(0);
  * </pre></blockquote>

jdk/src/share/classes/java/lang/Byte.java

@@ -244,7 +244,7 @@ public final class Byte extends Number implements Comparable<Byte> {
      * <dd><i>Sign<sub>opt</sub></i> {@code 0X} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code #} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code 0} <i>OctalDigits</i>
-     * <p>
+     *
      * <dt><i>Sign:</i>
      * <dd>{@code -}
      * <dd>{@code +}

jdk/src/share/classes/java/lang/Character.java

@@ -5394,7 +5394,7 @@ class Character implements java.io.Serializable, Comparable<Character> {
      * Other_Lowercase as defined by the Unicode Standard.
      * <p>
      * The following are examples of lowercase characters:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      * a b c d e f g h i j k l m n o p q r s t u v w x y z
      * '&#92;u00DF' '&#92;u00E0' '&#92;u00E1' '&#92;u00E2' '&#92;u00E3' '&#92;u00E4' '&#92;u00E5' '&#92;u00E6'
      * '&#92;u00E7' '&#92;u00E8' '&#92;u00E9' '&#92;u00EA' '&#92;u00EB' '&#92;u00EC' '&#92;u00ED' '&#92;u00EE'
@@ -5430,7 +5430,7 @@ class Character implements java.io.Serializable, Comparable<Character> {
      * Other_Lowercase as defined by the Unicode Standard.
      * <p>
      * The following are examples of lowercase characters:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      * a b c d e f g h i j k l m n o p q r s t u v w x y z
      * '&#92;u00DF' '&#92;u00E0' '&#92;u00E1' '&#92;u00E2' '&#92;u00E3' '&#92;u00E4' '&#92;u00E5' '&#92;u00E6'
      * '&#92;u00E7' '&#92;u00E8' '&#92;u00E9' '&#92;u00EA' '&#92;u00EB' '&#92;u00EC' '&#92;u00ED' '&#92;u00EE'
@@ -5461,14 +5461,14 @@ class Character implements java.io.Serializable, Comparable<Character> {
      * or it has contributory property Other_Uppercase as defined by the Unicode Standard.
      * <p>
      * The following are examples of uppercase characters:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      * A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
      * '&#92;u00C0' '&#92;u00C1' '&#92;u00C2' '&#92;u00C3' '&#92;u00C4' '&#92;u00C5' '&#92;u00C6' '&#92;u00C7'
      * '&#92;u00C8' '&#92;u00C9' '&#92;u00CA' '&#92;u00CB' '&#92;u00CC' '&#92;u00CD' '&#92;u00CE' '&#92;u00CF'
      * '&#92;u00D0' '&#92;u00D1' '&#92;u00D2' '&#92;u00D3' '&#92;u00D4' '&#92;u00D5' '&#92;u00D6' '&#92;u00D8'
      * '&#92;u00D9' '&#92;u00DA' '&#92;u00DB' '&#92;u00DC' '&#92;u00DD' '&#92;u00DE'
      * </pre></blockquote>
-     * <p> Many other Unicode characters are uppercase too.<p>
+     * <p> Many other Unicode characters are uppercase too.
      *
      * <p><b>Note:</b> This method cannot handle <a
      * href="#supplementary"> supplementary characters</a>. To support
@@ -5496,7 +5496,7 @@ class Character implements java.io.Serializable, Comparable<Character> {
      * or it has contributory property Other_Uppercase as defined by the Unicode Standard.
      * <p>
      * The following are examples of uppercase characters:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      * A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
      * '&#92;u00C0' '&#92;u00C1' '&#92;u00C2' '&#92;u00C3' '&#92;u00C4' '&#92;u00C5' '&#92;u00C6' '&#92;u00C7'
      * '&#92;u00C8' '&#92;u00C9' '&#92;u00CA' '&#92;u00CB' '&#92;u00CC' '&#92;u00CD' '&#92;u00CE' '&#92;u00CF'
@@ -5540,7 +5540,7 @@ class Character implements java.io.Serializable, Comparable<Character> {
      * <li>{@code LATIN CAPITAL LETTER N WITH SMALL LETTER J}
      * <li>{@code LATIN CAPITAL LETTER D WITH SMALL LETTER Z}
      * </ul>
-     * <p> Many other Unicode characters are titlecase too.<p>
+     * <p> Many other Unicode characters are titlecase too.
      *
      * <p><b>Note:</b> This method cannot handle <a
      * href="#supplementary"> supplementary characters</a>. To support

jdk/src/share/classes/java/lang/Class.java

@@ -91,7 +91,7 @@ import sun.reflect.misc.ReflectUtil;
  * <p> The following example uses a {@code Class} object to print the
  * class name of an object:
  *
- * <p> <blockquote><pre>
+ * <blockquote><pre>
  *     void printClassName(Object obj) {
  *         System.out.println("The class of " + obj +
  *                            " is " + obj.getClass().getName());
@@ -103,7 +103,7 @@ import sun.reflect.misc.ReflectUtil;
  * <cite>The Java&trade; Language Specification</cite>.
  * For example:
  *
- * <p> <blockquote>
+ * <blockquote>
  *     {@code System.out.println("The name of class Foo is: "+Foo.class.getName());}
  * </blockquote>
  *

jdk/src/share/classes/java/lang/ClassCastException.java

@@ -29,7 +29,7 @@ package java.lang;
  * Thrown to indicate that the code has attempted to cast an object
  * to a subclass of which it is not an instance. For example, the
  * following code generates a <code>ClassCastException</code>:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     Object x = new Integer(0);
  *     System.out.println((String)x);
  * </pre></blockquote>

jdk/src/share/classes/java/lang/Double.java

@@ -361,15 +361,11 @@ public final class Double extends Number implements Comparable<Double> {
      * <dd><i>SignedInteger</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>HexFloatingPointLiteral</i>:
      * <dd> <i>HexSignificand BinaryExponent FloatTypeSuffix<sub>opt</sub></i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>HexSignificand:</i>
      * <dd><i>HexNumeral</i>
@@ -380,15 +376,11 @@ public final class Double extends Number implements Comparable<Double> {
      *     </i>{@code .} <i>HexDigits</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>BinaryExponent:</i>
      * <dd><i>BinaryExponentIndicator SignedInteger</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>BinaryExponentIndicator:</i>
      * <dd>{@code p}

jdk/src/share/classes/java/lang/Float.java

@@ -321,15 +321,11 @@ public final class Float extends Number implements Comparable<Float> {
      * <dd><i>SignedInteger</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>HexFloatingPointLiteral</i>:
      * <dd> <i>HexSignificand BinaryExponent FloatTypeSuffix<sub>opt</sub></i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>HexSignificand:</i>
      * <dd><i>HexNumeral</i>
@@ -340,15 +336,11 @@ public final class Float extends Number implements Comparable<Float> {
      *     </i>{@code .} <i>HexDigits</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>BinaryExponent:</i>
      * <dd><i>BinaryExponentIndicator SignedInteger</i>
      * </dl>
      *
-     * <p>
-     *
      * <dl>
      * <dt><i>BinaryExponentIndicator:</i>
      * <dd>{@code p}

jdk/src/share/classes/java/lang/Integer.java

@@ -1123,7 +1123,7 @@ public final class Integer extends Number implements Comparable<Integer> {
      * <dd><i>Sign<sub>opt</sub></i> {@code 0X} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code #} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code 0} <i>OctalDigits</i>
-     * <p>
+     *
      * <dt><i>Sign:</i>
      * <dd>{@code -}
      * <dd>{@code +}

jdk/src/share/classes/java/lang/Iterable.java

@@ -99,4 +99,3 @@ public interface Iterable<T> {
         return Spliterators.spliteratorUnknownSize(iterator(), 0);
     }
 }
-

jdk/src/share/classes/java/lang/Long.java

@@ -853,7 +853,7 @@ public final class Long extends Number implements Comparable<Long> {
      * <dd><i>Sign<sub>opt</sub></i> {@code 0X} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code #} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code 0} <i>OctalDigits</i>
-     * <p>
+     *
      * <dt><i>Sign:</i>
      * <dd>{@code -}
      * <dd>{@code +}

jdk/src/share/classes/java/lang/RuntimePermission.java

@@ -47,7 +47,6 @@ import java.util.StringTokenizer;
  * The following table lists all the possible RuntimePermission target names,
  * and for each provides a description of what the permission allows
  * and a discussion of the risks of granting code the permission.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="permission target name,
  *  what the target allows,and associated risks">

jdk/src/share/classes/java/lang/Short.java

@@ -249,7 +249,7 @@ public final class Short extends Number implements Comparable<Short> {
      * <dd><i>Sign<sub>opt</sub></i> {@code 0X} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code #} <i>HexDigits</i>
      * <dd><i>Sign<sub>opt</sub></i> {@code 0} <i>OctalDigits</i>
-     * <p>
+     *
      * <dt><i>Sign:</i>
      * <dd>{@code -}
      * <dd>{@code +}

jdk/src/share/classes/java/lang/String.java

@@ -47,16 +47,16 @@ import java.util.regex.PatternSyntaxException;
  * Strings are constant; their values cannot be changed after they
  * are created. String buffers support mutable strings.
  * Because String objects are immutable they can be shared. For example:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     String str = "abc";
  * </pre></blockquote><p>
  * is equivalent to:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     char data[] = {'a', 'b', 'c'};
  *     String str = new String(data);
  * </pre></blockquote><p>
  * Here are some more examples of how strings can be used:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     System.out.println("abc");
  *     String cde = "cde";
  *     System.out.println("abc" + cde);
@@ -786,7 +786,7 @@ public final class String
      * {@code srcEnd-srcBegin}). The characters are copied into the
      * subarray of {@code dst} starting at index {@code dstBegin}
      * and ending at index:
-     * <p><blockquote><pre>
+     * <blockquote><pre>
      *     dstbegin + (srcEnd-srcBegin) - 1
      * </pre></blockquote>
      *
@@ -2662,7 +2662,7 @@ public final class String
      * {@code String} may be a different length than the original {@code String}.
      * <p>
      * Examples of locale-sensitive and 1:M case mappings are in the following table.
-     * <p>
+     *
      * <table border="1" summary="Examples of locale-sensitive and 1:M case mappings. Shows Language code of locale, lower case, upper case, and description.">
      * <tr>
      *   <th>Language Code of Locale</th>

jdk/src/share/classes/java/lang/Thread.java

@@ -76,7 +76,7 @@ import sun.security.util.SecurityConstants;
  * <code>Thread</code>. An instance of the subclass can then be
  * allocated and started. For example, a thread that computes primes
  * larger than a stated value could be written as follows:
- * <p><hr><blockquote><pre>
+ * <hr><blockquote><pre>
  *     class PrimeThread extends Thread {
  *         long minPrime;
  *         PrimeThread(long minPrime) {
@@ -91,7 +91,7 @@ import sun.security.util.SecurityConstants;
  * </pre></blockquote><hr>
  * <p>
  * The following code would then create a thread and start it running:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     PrimeThread p = new PrimeThread(143);
  *     p.start();
  * </pre></blockquote>
@@ -102,7 +102,7 @@ import sun.security.util.SecurityConstants;
  * then be allocated, passed as an argument when creating
  * <code>Thread</code>, and started. The same example in this other
  * style looks like the following:
- * <p><hr><blockquote><pre>
+ * <hr><blockquote><pre>
  *     class PrimeRun implements Runnable {
  *         long minPrime;
  *         PrimeRun(long minPrime) {
@@ -117,7 +117,7 @@ import sun.security.util.SecurityConstants;
  * </pre></blockquote><hr>
  * <p>
  * The following code would then create a thread and start it running:
- * <p><blockquote><pre>
+ * <blockquote><pre>
  *     PrimeRun p = new PrimeRun(143);
  *     new Thread(p).start();
  * </pre></blockquote>

jdk/src/share/classes/java/lang/management/ManagementFactory.java

@@ -60,7 +60,7 @@ import sun.management.ManagementFactoryHelper;
  * one or more <i>platform MXBeans</i> representing
  * the management interface of a component of the Java virtual
  * machine.
- * <p>
+ *
  * <h3><a name="MXBean">Platform MXBeans</a></h3>
  * <p>
  * A platform MXBean is a <i>managed bean</i> that

jdk/src/share/classes/java/lang/management/ManagementPermission.java

@@ -33,10 +33,8 @@ package java.lang.management;
  * The following table
  * provides a summary description of what the permission allows,
  * and discusses the risks of granting code the permission.
- * <P>
  *
- * <table border=1 cellpadding=5 summary="Table shows permission target name, wh
+ * <table border=1 cellpadding=5 summary="Table shows permission target name, what the permission allows, and associated risks">
-at the permission allows, and associated risks">
  * <tr>
  * <th>Permission Target Name</th>
  * <th>What the Permission Allows</th>

jdk/src/share/classes/java/lang/management/MemoryUsage.java

@@ -79,7 +79,7 @@ import sun.management.MemoryUsageCompositeData;
  * </table>
  *
  * Below is a picture showing an example of a memory pool:
- * <p>
+ *
  * <pre>
  *        +----------------------------------------------+
  *        +////////////////           |                  +
@@ -250,7 +250,7 @@ public class MemoryUsage {
      * Returns a <tt>MemoryUsage</tt> object represented by the
      * given <tt>CompositeData</tt>. The given <tt>CompositeData</tt>
      * must contain the following attributes:
-     * <p>
+     *
      * <blockquote>
      * <table border summary="The attributes and the types the given CompositeData contains">
      * <tr>

jdk/src/share/classes/java/lang/management/package.html

@@ -82,7 +82,7 @@ Java virtual machine and the runtime in the following ways:
 <b>1. Direct access to an MXBean interface</b>
 <p>
 <ul>
-<li>Get an MXBean instance locally in the running Java virtual machine:<p>
+<li>Get an MXBean instance locally in the running Java virtual machine:
 <pre>
    RuntimeMXBean mxbean = ManagementFactory.getRuntimeMXBean();
 
@@ -103,7 +103,7 @@ Java virtual machine and the runtime in the following ways:
 <p>
 </li>
 <li>Construct an MXBean proxy instance that forwards the
-    method calls to a given MBeanServer:<p>
+    method calls to a given MBeanServer:
 <pre>
    MBeanServerConnection mbs;
 

jdk/src/share/classes/java/lang/reflect/ReflectPermission.java

@@ -31,7 +31,6 @@ package java.lang.reflect;
  * The following table
  * provides a summary description of what the permission allows,
  * and discusses the risks of granting code the permission.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="Table shows permission target name, what the permission allows, and associated risks">
  * <tr>

jdk/src/share/classes/java/net/DatagramSocket.java

@@ -196,7 +196,7 @@ class DatagramSocket implements java.io.Closeable {
      * socket address.
      * <p>
      * If, if the address is {@code null}, creates an unbound socket.
-     * <p>
+     *
      * <p>If there is a security manager,
      * its {@code checkListen} method is first called
      * with the port from the socket address
@@ -1109,7 +1109,7 @@ class DatagramSocket implements java.io.Closeable {
      * represent the value of the TOS octet in IP packets sent by
      * the socket.
      * RFC 1349 defines the TOS values as follows:
-     * <p>
+     *
      * <UL>
      * <LI><CODE>IPTOS_LOWCOST (0x02)</CODE></LI>
      * <LI><CODE>IPTOS_RELIABILITY (0x04)</CODE></LI>

jdk/src/share/classes/java/net/Inet6Address.java

@@ -133,7 +133,7 @@ import java.util.Arrays;
  *         representation. However, it will be converted into an IPv4
  *         address.</td></tr>
  * </table></blockquote>
- * <p>
+ *
  * <h4><A NAME="scoped">Textual representation of IPv6 scoped addresses</a></h4>
  *
  * <p> The textual representation of IPv6 addresses as described above can be
@@ -150,11 +150,11 @@ import java.util.Arrays;
  *
  * <p> The general format for specifying the <i>scope_id</i> is the following:
  *
- * <p><blockquote><i>IPv6-address</i>%<i>scope_id</i></blockquote>
+ * <blockquote><i>IPv6-address</i>%<i>scope_id</i></blockquote>
  * <p> The IPv6-address is a literal IPv6 address as described above.
  * The <i>scope_id</i> refers to an interface on the local system, and it can be
  * specified in two ways.
- * <p><ol><li><i>As a numeric identifier.</i> This must be a positive integer
+ * <ol><li><i>As a numeric identifier.</i> This must be a positive integer
  * that identifies the particular interface and scope as understood by the
  * system. Usually, the numeric values can be determined through administration
  * tools on the system. Each interface may have multiple values, one for each

jdk/src/share/classes/java/net/MulticastSocket.java

@@ -140,7 +140,7 @@ class MulticastSocket extends DatagramSocket {
      * Create a MulticastSocket bound to the specified socket address.
      * <p>
      * Or, if the address is {@code null}, create an unbound socket.
-     * <p>
+     *
      * <p>If there is a security manager,
      * its {@code checkListen} method is first called
      * with the SocketAddress port as its argument to ensure the operation is allowed.

jdk/src/share/classes/java/net/NetPermission.java

@@ -46,7 +46,6 @@ import java.util.StringTokenizer;
  * The following table lists all the possible NetPermission target names,
  * and for each provides a description of what the permission allows
  * and a discussion of the risks of granting code the permission.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="Permission target name, what the permission allows, and associated risks">
  * <tr>

jdk/src/share/classes/java/net/Proxy.java

@@ -66,8 +66,8 @@ public class Proxy {
      * Used, for instance, to create sockets bypassing any other global
      * proxy settings (like SOCKS):
      * <P>
-     * {@code Socket s = new Socket(Proxy.NO_PROXY);}<br>
+     * {@code Socket s = new Socket(Proxy.NO_PROXY);}
-     * <P>
+     *
      */
     public final static Proxy NO_PROXY = new Proxy();
 

jdk/src/share/classes/java/net/Socket.java

@@ -1230,13 +1230,13 @@ class Socket implements java.io.Closeable {
      * Generally, the window size can be modified at any time when a socket is
      * connected. However, if a receive window larger than 64K is required then
      * this must be requested <B>before</B> the socket is connected to the
-     * remote peer. There are two cases to be aware of:<p>
+     * remote peer. There are two cases to be aware of:
      * <ol>
      * <li>For sockets accepted from a ServerSocket, this must be done by calling
      * {@link ServerSocket#setReceiveBufferSize(int)} before the ServerSocket
      * is bound to a local address.<p></li>
      * <li>For client sockets, setReceiveBufferSize() must be called before
-     * connecting the socket to its remote peer.<p></li></ol>
+     * connecting the socket to its remote peer.</li></ol>
      * @param size the size to which to set the receive buffer
      * size. This value must be greater than 0.
      *
@@ -1329,7 +1329,7 @@ class Socket implements java.io.Closeable {
      * represent the value of the TOS octet in IP packets sent by
      * the socket.
      * RFC 1349 defines the TOS values as follows:
-     * <p>
+     *
      * <UL>
      * <LI><CODE>IPTOS_LOWCOST (0x02)</CODE></LI>
      * <LI><CODE>IPTOS_RELIABILITY (0x04)</CODE></LI>

jdk/src/share/classes/java/net/SocketOptions.java

@@ -134,7 +134,7 @@ public interface SocketOptions {
      * previously written data.
      *<P>
      * Valid for TCP only: SocketImpl.
-     * <P>
+     *
      * @see Socket#setTcpNoDelay
      * @see Socket#getTcpNoDelay
      */
@@ -155,7 +155,7 @@ public interface SocketOptions {
      * This option <B>must</B> be specified in the constructor.
      * <P>
      * Valid for: SocketImpl, DatagramSocketImpl
-     * <P>
+     *
      * @see Socket#getLocalAddress
      * @see DatagramSocket#getLocalAddress
      */
@@ -186,7 +186,7 @@ public interface SocketOptions {
      * want to use other than the system default.  Takes/returns an InetAddress.
      * <P>
      * Valid for Multicast: DatagramSocketImpl
-     * <P>
+     *
      * @see MulticastSocket#setInterface(InetAddress)
      * @see MulticastSocket#getInterface()
      */

jdk/src/share/classes/java/net/SocketPermission.java

@@ -779,27 +779,27 @@ public final class SocketPermission extends Permission
      * specified permission.
      * <P>
      * More specifically, this method first ensures that all of the following
-     * are true (and returns false if any of them are not):<p>
+     * are true (and returns false if any of them are not):
      * <ul>
-     * <li> <i>p</i> is an instanceof SocketPermission,<p>
+     * <li> <i>p</i> is an instanceof SocketPermission,
      * <li> <i>p</i>'s actions are a proper subset of this
-     * object's actions, and<p>
+     * object's actions, and
      * <li> <i>p</i>'s port range is included in this port range. Note:
-     * port range is ignored when p only contains the action, 'resolve'.<p>
+     * port range is ignored when p only contains the action, 'resolve'.
      * </ul>
      *
      * Then {@code implies} checks each of the following, in order,
-     * and for each returns true if the stated condition is true:<p>
+     * and for each returns true if the stated condition is true:
      * <ul>
      * <li> If this object was initialized with a single IP address and one of <i>p</i>'s
-     * IP addresses is equal to this object's IP address.<p>
+     * IP addresses is equal to this object's IP address.
      * <li>If this object is a wildcard domain (such as *.sun.com), and
      * <i>p</i>'s canonical name (the name without any preceding *)
      * ends with this object's canonical host name. For example, *.sun.com
-     * implies *.eng.sun.com..<p>
+     * implies *.eng.sun.com.
      * <li>If this object was not initialized with a single IP address, and one of this
-     * object's IP addresses equals one of <i>p</i>'s IP addresses.<p>
+     * object's IP addresses equals one of <i>p</i>'s IP addresses.
-     * <li>If this canonical name equals <i>p</i>'s canonical name.<p>
+     * <li>If this canonical name equals <i>p</i>'s canonical name.
      * </ul>
      *
      * If none of the above are true, {@code implies} returns false.

jdk/src/share/classes/java/net/URI.java

@@ -389,20 +389,20 @@ import java.lang.NullPointerException;  // for javadoc
  * colon following a host name but no port (as in
  * {@code http://java.sun.com:} ), and that does not encode characters
  * except those that must be quoted, the following identities also hold:
- * <p><pre>
+ * <pre>
  *     new URI(<i>u</i>.getScheme(),
  *             <i>u</i>.getSchemeSpecificPart(),
  *             <i>u</i>.getFragment())
  *     .equals(<i>u</i>)</pre>
  * in all cases,
- * <p><pre>
+ * <pre>
  *     new URI(<i>u</i>.getScheme(),
  *             <i>u</i>.getUserInfo(), <i>u</i>.getAuthority(),
  *             <i>u</i>.getPath(), <i>u</i>.getQuery(),
  *             <i>u</i>.getFragment())
  *     .equals(<i>u</i>)</pre>
  * if <i>u</i> is hierarchical, and
- * <p><pre>
+ * <pre>
  *     new URI(<i>u</i>.getScheme(),
  *             <i>u</i>.getUserInfo(), <i>u</i>.getHost(), <i>u</i>.getPort(),
  *             <i>u</i>.getPath(), <i>u</i>.getQuery(),

jdk/src/share/classes/java/net/URLConnection.java

@@ -45,7 +45,7 @@ import sun.net.www.MessageHeader;
  * application and a URL. Instances of this class can be used both to
  * read from and to write to the resource referenced by the URL. In
  * general, creating a connection to a URL is a multistep process:
- * <p>
+ *
  * <center><table border=2 summary="Describes the process of creating a connection to a URL: openConnection() and connect() over time.">
  * <tr><th>{@code openConnection()}</th>
  *     <th>{@code connect()}</th></tr>

jdk/src/share/classes/java/net/URLDecoder.java

@@ -43,7 +43,7 @@ import java.io.*;
  * as the start of a special escaped sequence.
  * <p>
  * The following rules are applied in the conversion:
- * <p>
+ *
  * <ul>
  * <li>The alphanumeric characters &quot;{@code a}&quot; through
  *     &quot;{@code z}&quot;, &quot;{@code A}&quot; through

jdk/src/share/classes/java/net/URLEncoder.java

@@ -49,7 +49,6 @@ import sun.security.action.GetPropertyAction;
  * <p>
  * When encoding a String, the following rules apply:
  *
- * <p>
  * <ul>
  * <li>The alphanumeric characters &quot;{@code a}&quot; through
  *     &quot;{@code z}&quot;, &quot;{@code A}&quot; through

jdk/src/share/classes/java/net/URLPermission.java

@@ -45,7 +45,7 @@ import java.security.Permission;
  * </pre>
  * <i>scheme</i> will typically be http or https, but is not restricted by this
  * class.
- * <i>authority</i> is specified as:<p>
+ * <i>authority</i> is specified as:
  * <pre>
  *     authority = hostrange [ : portrange ]
  *     portrange = portnumber | -portnumber | portnumber-[portnumber] | *
@@ -223,7 +223,7 @@ public final class URLPermission extends Permission {
      * Checks if this URLPermission implies the given permission.
      * Specifically, the following checks are done as if in the
      * following sequence:
-     * <p><ul>
+     * <ul>
      * <li>if 'p' is not an instance of URLPermission return false</li>
      * <li>if any of p's methods are not in this's method list, and if
      *     this's method list is not equal to "*", then return false.</li>
@@ -242,7 +242,7 @@ public final class URLPermission extends Permission {
      * <li>otherwise, return false</li>
      * </ul>
      * <p>Some examples of how paths are matched are shown below:
-     * <p><table border>
+     * <table border>
      * <caption>Examples of Path Matching</caption>
      * <tr><th>this's path</th><th>p's path</th><th>match</th></tr>
      * <tr><td>/a/b</td><td>/a/b</td><td>yes</td></tr>

jdk/src/share/classes/java/net/package-info.java

@@ -127,9 +127,9 @@
  *    resources, then convert it into a {@link java.net.URL} when it is time to
  *    access the resource. From that URL, you can either get the
  *    {@link java.net.URLConnection} for fine control, or get directly the
- *    InputStream.<p>
+ *    InputStream.
  * <p>Here is an example:</p>
- * <p><pre>
+ * <pre>
  * URI uri = new URI("http://java.sun.com/");
  * URL url = uri.toURL();
  * InputStream in = url.openStream();
@@ -147,7 +147,7 @@
  *    the {@code java.protocol.handler.pkgs} system property. For instance if
  *    it is set to {@code myapp.protocols}, then the URL code will try, in the
  *    case of http, first to load {@code myapp.protocols.http.Handler}, then,
- *    if this fails, {@code http.Handler} from the default location.<p>
+ *    if this fails, {@code http.Handler} from the default location.
  * <p>Note that the Handler class <b>has to</b> be a subclass of the abstract
  *    class {@link java.net.URLStreamHandler}.</p>
  * <h2>Additional Specification</h2>

jdk/src/share/classes/java/nio/X-Buffer.java.template

@@ -1129,7 +1129,7 @@ public abstract class $Type$Buffer
      *
      * <p> Two $type$ buffers are equal if, and only if,
      *
-     * <p><ol>
+     * <ol>
      *
      *   <li><p> They have the same element type,  </p></li>
      *

jdk/src/share/classes/java/nio/file/FileSystem.java

@@ -355,7 +355,7 @@ public abstract class FileSystem
      *
      * <p> The following rules are used to interpret glob patterns:
      *
-     * <p> <ul>
+     * <ul>
      *   <li><p> The {@code *} character matches zero or more {@link Character
      *   characters} of a {@link Path#getName(int) name} component without
      *   crossing directory boundaries. </p></li>

jdk/src/share/classes/java/rmi/activation/ActivationGroup.java

@@ -154,21 +154,21 @@ public abstract class ActivationGroup
      * active). If the object does not call
      * <code>Activatable.inactive</code> when it deactivates, the
      * object will never be garbage collected since the group keeps
-     * strong references to the objects it creates. <p>
+     * strong references to the objects it creates.
      *
      * <p>The group's <code>inactiveObject</code> method unexports the
      * remote object from the RMI runtime so that the object can no
      * longer receive incoming RMI calls. An object will only be unexported
      * if the object has no pending or executing calls.
      * The subclass of <code>ActivationGroup</code> must override this
-     * method and unexport the object. <p>
+     * method and unexport the object.
      *
      * <p>After removing the object from the RMI runtime, the group
      * must inform its <code>ActivationMonitor</code> (via the monitor's
      * <code>inactiveObject</code> method) that the remote object is
      * not currently active so that the remote object will be
      * re-activated by the activator upon a subsequent activation
-     * request.<p>
+     * request.
      *
      * <p>This method simply informs the group's monitor that the object
      * is inactive.  It is up to the concrete subclass of ActivationGroup

jdk/src/share/classes/java/rmi/dgc/VMID.java

@@ -67,7 +67,7 @@ public final class VMID implements java.io.Serializable {
      * conditions: a) the conditions for uniqueness for objects of
      * the class <code>java.rmi.server.UID</code> are satisfied, and b) an
      * address can be obtained for this host that is unique and constant
-     * for the lifetime of this object.  <p>
+     * for the lifetime of this object.
      */
     public VMID() {
         addr = randomBytes;

jdk/src/share/classes/java/rmi/server/UnicastRemoteObject.java

@@ -36,7 +36,7 @@ import sun.rmi.server.UnicastServerRef2;
  * below, the stub for a remote object being exported is obtained as
  * follows:
  *
- * <p><ul>
+ * <ul>
  *
  * <li>If the remote object is exported using the {@link
  * #exportObject(Remote) UnicastRemoteObject.exportObject(Remote)} method,
@@ -66,9 +66,8 @@ import sun.rmi.server.UnicastServerRef2;
  * could not be loaded, or a problem occurs creating the stub instance, a
  * {@link StubNotFoundException} is thrown.
  *
- * <p>
  * <li>For all other means of exporting:
- * <p><ul>
+ * <ul>
  *
  * <li>If the remote object's stub class (as defined above) could not be
  * loaded or the system property
@@ -93,7 +92,6 @@ import sun.rmi.server.UnicastServerRef2;
  * will be thrown.
  * </ul>
  *
- * <p>
  * <li>Otherwise, an instance of the remote object's stub class (as
  * described above) is used as the stub.
  *

jdk/src/share/classes/java/security/AccessController.java

@@ -39,9 +39,9 @@ import sun.reflect.Reflection;
  * <ul>
  * <li> to decide whether an access to a critical system
  * resource is to be allowed or denied, based on the security policy
- * currently in effect,<p>
+ * currently in effect,
  * <li>to mark code as being "privileged", thus affecting subsequent
- * access determinations, and<p>
+ * access determinations, and
  * <li>to obtain a "snapshot" of the current calling context so
  * access-control decisions from a different context can be made with
  * respect to the saved context. </ul>

jdk/src/share/classes/java/security/AlgorithmParameterGenerator.java

@@ -48,7 +48,7 @@ import java.security.spec.AlgorithmParameterSpec;
  * of the prime modulus (in bits).
  * When using this approach, algorithm-specific parameter generation
  * values - if any - default to some standard values, unless they can be
- * derived from the specified size.<P>
+ * derived from the specified size.
  *
  * <li>The other approach initializes a parameter generator object
  * using algorithm-specific semantics, which are represented by a set of

jdk/src/share/classes/java/security/BasicPermission.java

@@ -57,7 +57,6 @@ import java.io.IOException;
  * Subclasses may implement actions on top of BasicPermission,
  * if desired.
  * <p>
- * <P>
  * @see java.security.Permission
  * @see java.security.Permissions
  * @see java.security.PermissionCollection
@@ -153,9 +152,9 @@ public abstract class BasicPermission extends Permission
      * Checks if the specified permission is "implied" by
      * this object.
      * <P>
-     * More specifically, this method returns true if:<p>
+     * More specifically, this method returns true if:
      * <ul>
-     * <li> <i>p</i>'s class is the same as this object's class, and<p>
+     * <li> <i>p</i>'s class is the same as this object's class, and
      * <li> <i>p</i>'s name equals or (in the case of wildcards)
      *      is implied by this object's
      *      name. For example, "a.b.*" implies "a.b.c".

jdk/src/share/classes/java/security/CodeSource.java

@@ -234,7 +234,7 @@ public class CodeSource implements java.io.Serializable {
      * Returns true if this CodeSource object "implies" the specified CodeSource.
      * <p>
      * More specifically, this method makes the following checks.
-     * If any fail, it returns false. If they all succeed, it returns true.<p>
+     * If any fail, it returns false. If they all succeed, it returns true.
      * <ul>
      * <li> <i>codesource</i> must not be null.
      * <li> If this object's certificates are not null, then all
@@ -242,7 +242,7 @@ public class CodeSource implements java.io.Serializable {
      * certificates.
      * <li> If this object's location (getLocation()) is not null, then the
      * following checks are made against this object's location and
-     * <i>codesource</i>'s:<p>
+     * <i>codesource</i>'s:
      *   <ul>
      *     <li>  <i>codesource</i>'s location must not be null.
      *

jdk/src/share/classes/java/security/Key.java

@@ -39,7 +39,7 @@ package java.security;
  * RSA), which will work with those algorithms and with related
  * algorithms (such as MD5 with RSA, SHA-1 with RSA, Raw DSA, etc.)
  * The name of the algorithm of a key is obtained using the
- * {@link #getAlgorithm() getAlgorithm} method.<P>
+ * {@link #getAlgorithm() getAlgorithm} method.
  *
  * <LI>An Encoded Form
  *
@@ -65,12 +65,11 @@ package java.security;
  * For more information, see
  * <a href="http://www.ietf.org/rfc/rfc3280.txt">RFC 3280:
  * Internet X.509 Public Key Infrastructure Certificate and CRL Profile</a>.
- * <P>
  *
  * <LI>A Format
  *
  * <P>This is the name of the format of the encoded key. It is returned
- * by the {@link #getFormat() getFormat} method.<P>
+ * by the {@link #getFormat() getFormat} method.
  *
  * </UL>
  *

jdk/src/share/classes/java/security/KeyPairGenerator.java

@@ -77,7 +77,6 @@ import sun.security.jca.GetInstance.Instance;
  * providers might have precomputed parameter sets for more than just the
  * three modulus sizes mentioned above. Still others might not have a list of
  * precomputed parameters at all and instead always create new parameter sets.
- * <p>
  *
  * <li><b>Algorithm-Specific Initialization</b>
  * <p>For situations where a set of algorithm-specific parameters already

jdk/src/share/classes/java/security/KeyStore.java

@@ -98,7 +98,6 @@ import javax.security.auth.callback.*;
  *    KeyStore ks = KeyStore.getInstance(KeyStore.getDefaultType());
  * </pre>
  * The system will return a keystore implementation for the default type.
- * <p>
  *
  * <li>To provide a specific keystore type:
  * <pre>

jdk/src/share/classes/java/security/MessageDigest.java

@@ -54,21 +54,21 @@ import java.nio.ByteBuffer;
  *
  * <p>Implementations are free to implement the Cloneable interface.
  * Client applications can test cloneability by attempting cloning
- * and catching the CloneNotSupportedException: <p>
+ * and catching the CloneNotSupportedException:
  *
-* <pre>
+ * <pre>{@code
-* MessageDigest md = MessageDigest.getInstance("SHA");
+ * MessageDigest md = MessageDigest.getInstance("SHA");
-*
+ *
-* try {
+ * try {
-*     md.update(toChapter1);
+ *     md.update(toChapter1);
-*     MessageDigest tc1 = md.clone();
+ *     MessageDigest tc1 = md.clone();
-*     byte[] toChapter1Digest = tc1.digest();
+ *     byte[] toChapter1Digest = tc1.digest();
-*     md.update(toChapter2);
+ *     md.update(toChapter2);
-*     ...etc.
+ *     ...etc.
-* } catch (CloneNotSupportedException cnse) {
+ * } catch (CloneNotSupportedException cnse) {
-*     throw new DigestException("couldn't make digest of partial content");
+ *     throw new DigestException("couldn't make digest of partial content");
-* }
+ * }
-* </pre>
+ * }</pre>
  *
  * <p>Note that if a given implementation is not cloneable, it is
  * still possible to compute intermediate digests by instantiating

jdk/src/share/classes/java/security/Permission.java

@@ -138,14 +138,14 @@ public abstract class Permission implements Guard, java.io.Serializable {
      * Returns the hash code value for this Permission object.
      * <P>
      * The required {@code hashCode} behavior for Permission Objects is
-     * the following: <p>
+     * the following:
      * <ul>
      * <li>Whenever it is invoked on the same Permission object more than
      *     once during an execution of a Java application, the
      *     {@code hashCode} method
      *     must consistently return the same integer. This integer need not
      *     remain consistent from one execution of an application to another
-     *     execution of the same application. <p>
+     *     execution of the same application.
      * <li>If two Permission objects are equal according to the
      *     {@code equals}
      *     method, then calling the {@code hashCode} method on each of the

jdk/src/share/classes/java/security/PermissionCollection.java

@@ -37,7 +37,6 @@ import java.util.*;
  *      collection, using the {@code implies} method.
  * <LI> enumerate all the permissions, using the {@code elements} method.
  * </UL>
- * <P>
  *
  * <p>When it is desirable to group together a number of Permission objects
  * of the same type, the {@code newPermissionCollection} method on that

jdk/src/share/classes/java/security/SecurityPermission.java

@@ -44,7 +44,6 @@ import java.util.StringTokenizer;
  * The following table lists all the possible SecurityPermission target names,
  * and for each provides a description of what the permission allows
  * and a discussion of the risks of granting code the permission.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="target name,what the permission allows, and associated risks">
  * <tr>
@@ -193,7 +192,6 @@ import java.util.StringTokenizer;
  * associated with classes that have been deprecated: {@link Identity},
  * {@link IdentityScope}, {@link Signer}. Use of them is discouraged. See the
  * applicable classes for more information.
- * <P>
  *
  * <table border=1 cellpadding=5 summary="target name,what the permission allows, and associated risks">
  * <tr>

jdk/src/share/classes/java/security/Signature.java

@@ -77,13 +77,13 @@ import sun.security.jca.GetInstance.Instance;
  *     (see {@link #initSign(PrivateKey)}
  *     and {@link #initSign(PrivateKey, SecureRandom)}).
  *
- *     </ul><p>
+ *     </ul>
  *
- * <li>Updating<p>
+ * <li>Updating
  *
  * <p>Depending on the type of initialization, this will update the
  * bytes to be signed or verified. See the
- * {@link #update(byte) update} methods.<p>
+ * {@link #update(byte) update} methods.
  *
  * <li>Signing or Verifying a signature on all updated bytes. See the
  * {@link #sign() sign} methods and the {@link #verify(byte[]) verify}

jdk/src/share/classes/java/security/SignedObject.java

@@ -43,7 +43,7 @@ import java.io.*;
  * object passed to the constructor and the {@code verify} method.
  * A typical usage for signing is the following:
  *
- * <p> <pre>{@code
+ * <pre>{@code
  * Signature signingEngine = Signature.getInstance(algorithm,
  *                                                 provider);
  * SignedObject so = new SignedObject(myobject, signingKey,
@@ -53,7 +53,7 @@ import java.io.*;
  * <p> A typical usage for verification is the following (having
  * received SignedObject {@code so}):
  *
- * <p> <pre>{@code
+ * <pre>{@code
  * Signature verificationEngine =
  *     Signature.getInstance(algorithm, provider);
  * if (so.verify(publickey, verificationEngine))

jdk/src/share/classes/java/security/acl/Acl.java

@@ -42,27 +42,27 @@ import java.security.Principal;
  * granted to the associated principal. If negative, the permissions
  * are to be denied.<p>
  *
- * The ACL Entries in each ACL observe the following rules:<p>
+ * The ACL Entries in each ACL observe the following rules:
  *
  * <ul> <li>Each principal can have at most one positive ACL entry and
  * one negative entry; that is, multiple positive or negative ACL
  * entries are not allowed for any principal.  Each entry specifies
  * the set of permissions that are to be granted (if positive) or
- * denied (if negative). <p>
+ * denied (if negative).
  *
  * <li>If there is no entry for a particular principal, then the
- * principal is considered to have a null (empty) permission set.<p>
+ * principal is considered to have a null (empty) permission set.
  *
  * <li>If there is a positive entry that grants a principal a
  * particular permission, and a negative entry that denies the
  * principal the same permission, the result is as though the
- * permission was never granted or denied. <p>
+ * permission was never granted or denied.
  *
  * <li>Individual permissions always override permissions of the
  * group(s) to which the individual belongs. That is, individual
  * negative permissions (specific denial of permissions) override the
  * groups' positive permissions. And individual positive permissions
- * override the groups' negative permissions.<p>
+ * override the groups' negative permissions.
  *
  * </ul>
  *
@@ -159,12 +159,12 @@ public interface Acl extends Owner {
      * Returns an enumeration for the set of allowed permissions for the
      * specified principal (representing an entity such as an individual or
      * a group). This set of allowed permissions is calculated as
-     * follows:<p>
+     * follows:
      *
      * <ul>
      *
      * <li>If there is no entry in this Access Control List for the
-     * specified principal, an empty permission set is returned.<p>
+     * specified principal, an empty permission set is returned.
      *
      * <li>Otherwise, the principal's group permission sets are determined.
      * (A principal can belong to one or more groups, where a group is a

jdk/src/share/classes/java/security/cert/CertificateFactory.java

@@ -63,7 +63,7 @@ import sun.security.jca.GetInstance.Instance;
  * supports those methods), so that each call to
  * {@code generateCertificate} consumes only one certificate, and the
  * read position of the input stream is positioned to the next certificate in
- * the file:<p>
+ * the file:
  *
  * <pre>{@code
  * FileInputStream fis = new FileInputStream(filename);
@@ -78,7 +78,7 @@ import sun.security.jca.GetInstance.Instance;
  * }</pre>
  *
  * <p>The following example parses a PKCS#7-formatted certificate reply stored
- * in a file and extracts all the certificates from it:<p>
+ * in a file and extracts all the certificates from it:
  *
  * <pre>
  * FileInputStream fis = new FileInputStream(filename);

jdk/src/share/classes/java/security/cert/PKIXRevocationChecker.java

@@ -299,7 +299,7 @@ public abstract class PKIXRevocationChecker extends PKIXCertPathChecker {
         /**
          * Allow revocation check to succeed if the revocation status cannot be
          * determined for one of the following reasons:
-         * <p><ul>
+         * <ul>
          *  <li>The CRL or OCSP response cannot be obtained because of a
          *      network error.
          *  <li>The OCSP responder returns one of the following errors

jdk/src/share/classes/java/security/cert/PolicyQualifierInfo.java

@@ -35,7 +35,7 @@ import sun.security.util.DerValue;
  * structure.
  *
  * <p>The ASN.1 definition is as follows:
- * <p><pre>
+ * <pre>
  *   PolicyQualifierInfo ::= SEQUENCE {
  *        policyQualifierId       PolicyQualifierId,
  *        qualifier               ANY DEFINED BY policyQualifierId }

jdk/src/share/classes/java/security/cert/TrustAnchor.java

@@ -44,7 +44,6 @@ import sun.security.x509.X500Name;
  * individual parameters.
  * <p>
  * <b>Concurrent Access</b>
- * <p>
  * <p>All {@code TrustAnchor} objects must be immutable and
  * thread-safe. That is, multiple threads may concurrently invoke the
  * methods defined in this class on a single {@code TrustAnchor}

jdk/src/share/classes/java/security/cert/X509CertSelector.java

@@ -359,7 +359,7 @@ public class X509CertSelector implements CertSelector {
      * criticality setting, and encapsulating OCTET STRING)
      * for a SubjectKeyIdentifier extension.
      * The ASN.1 notation for this structure follows.
-     * <p>
+     *
      * <pre>{@code
      * SubjectKeyIdentifier ::= KeyIdentifier
      *
@@ -399,7 +399,7 @@ public class X509CertSelector implements CertSelector {
      * criticality setting, and encapsulating OCTET STRING)
      * for an AuthorityKeyIdentifier extension.
      * The ASN.1 notation for this structure follows.
-     * <p>
+     *
      * <pre>{@code
      * AuthorityKeyIdentifier ::= SEQUENCE {
      *    keyIdentifier             [0] KeyIdentifier           OPTIONAL,

jdk/src/share/classes/java/security/interfaces/DSAKeyPairGenerator.java

@@ -43,11 +43,11 @@ import java.security.*;
  *
  * <li>Get a key pair generator for the DSA algorithm by calling the
  * KeyPairGenerator {@code getInstance} method with "DSA"
- * as its argument.<p>
+ * as its argument.
  *
  * <li>Initialize the generator by casting the result to a DSAKeyPairGenerator
  * and calling one of the
- * {@code initialize} methods from this DSAKeyPairGenerator interface.<p>
+ * {@code initialize} methods from this DSAKeyPairGenerator interface.
  *
  * <li>Generate a key pair by calling the {@code generateKeyPair}
  * method from the KeyPairGenerator class.

jdk/src/share/classes/java/text/MessageFormat.java

@@ -125,7 +125,6 @@ import java.util.Locale;
  * valid patterns, but <code>"ab {0'}' de"</code>, <code>"ab } de"</code>
  * and <code>"''{''"</code> are not.
  *
- * <p>
  * <dl><dt><b>Warning:</b><dd>The rules for using quotes within message
  * format patterns unfortunately have shown to be somewhat confusing.
  * In particular, it isn't always obvious to localizers whether single
@@ -146,7 +145,7 @@ import java.util.Locale;
  * table shows how the values map to {@code Format} instances. Combinations not
  * shown in the table are illegal. A <i>SubformatPattern</i> must
  * be a valid pattern string for the {@code Format} subclass used.
- * <p>
+ *
  * <table border=1 summary="Shows how FormatType and FormatStyle values map to Format instances">
  *    <tr>
  *       <th id="ft" class="TableHeadingColor">FormatType
@@ -215,7 +214,6 @@ import java.util.Locale;
  *       <td headers="fs"><i>SubformatPattern</i>
  *       <td headers="sc">{@code new} {@link ChoiceFormat#ChoiceFormat(String) ChoiceFormat}{@code (subformatPattern)}
  * </table>
- * <p>
  *
  * <h4>Usage Information</h4>
  *
@@ -761,7 +759,7 @@ public class MessageFormat extends Format {
      * as indicated by the first matching line of the following table. An
      * argument is <i>unavailable</i> if <code>arguments</code> is
      * <code>null</code> or has fewer than argumentIndex+1 elements.
-     * <p>
+     *
      * <table border=1 summary="Examples of subformat,argument,and formatted text">
      *    <tr>
      *       <th>Subformat

jdk/src/share/classes/java/text/Normalizer.java

@@ -53,12 +53,12 @@ import sun.text.normalizer.NormalizerImpl;
  * several different ways in Unicode.  For example, take the character A-acute.
  * In Unicode, this can be encoded as a single character (the "composed" form):
  *
- * <p><pre>
+ * <pre>
  *      U+00C1    LATIN CAPITAL LETTER A WITH ACUTE</pre>
  *
  * or as two separate characters (the "decomposed" form):
  *
- * <p><pre>
+ * <pre>
  *      U+0041    LATIN CAPITAL LETTER A
  *      U+0301    COMBINING ACUTE ACCENT</pre>
  *
@@ -72,14 +72,14 @@ import sun.text.normalizer.NormalizerImpl;
  * <p>
  * Similarly, the string "ffi" can be encoded as three separate letters:
  *
- * <p><pre>
+ * <pre>
  *      U+0066    LATIN SMALL LETTER F
  *      U+0066    LATIN SMALL LETTER F
  *      U+0069    LATIN SMALL LETTER I</pre>
  *
  * or as the single character
  *
- * <p><pre>
+ * <pre>
  *      U+FB03    LATIN SMALL LIGATURE FFI</pre>
  *
  * The ffi ligature is not a distinct semantic character, and strictly speaking

jdk/src/share/classes/java/text/SimpleDateFormat.java

@@ -356,7 +356,6 @@ import sun.util.locale.provider.LocaleProviderAdapter;
  * may be replaced with other, locale dependent, pattern letters.
  * <code>SimpleDateFormat</code> does not deal with the localization of text
  * other than the pattern letters; that's up to the client of the class.
- * <p>
  *
  * <h4>Examples</h4>
  *

jdk/src/share/classes/java/util/Base64.java

@@ -40,7 +40,6 @@ import java.nio.charset.StandardCharsets;
  * <a href="http://www.ietf.org/rfc/rfc4648.txt">RFC 4648</a> and
  * <a href="http://www.ietf.org/rfc/rfc2045.txt">RFC 2045</a>.
  *
- * <p>
  * <ul>
  * <li><a name="basic"><b>Basic</b></a>
  * <p> Uses "The Base64 Alphabet" as specified in Table 1 of

jdk/src/share/classes/java/util/BitSet.java

@@ -1164,10 +1164,10 @@ public class BitSet implements Cloneable, java.io.Serializable {
      * <p>Example:
      * <pre>
      * BitSet drPepper = new BitSet();</pre>
-     * Now {@code drPepper.toString()} returns "{@code {}}".<p>
+     * Now {@code drPepper.toString()} returns "{@code {}}".
      * <pre>
      * drPepper.set(2);</pre>
-     * Now {@code drPepper.toString()} returns "{@code {2}}".<p>
+     * Now {@code drPepper.toString()} returns "{@code {2}}".
      * <pre>
      * drPepper.set(4);
      * drPepper.set(10);</pre>

jdk/src/share/classes/java/util/Deque.java

@@ -56,7 +56,6 @@ package java.util;
  * <p>The twelve methods described above are summarized in the
  * following table:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Summary of Deque methods</caption>
  *  <tr>
@@ -100,7 +99,6 @@ package java.util;
  * inherited from the {@code Queue} interface are precisely equivalent to
  * {@code Deque} methods as indicated in the following table:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Comparison of Queue and Deque methods</caption>
  *  <tr>
@@ -139,7 +137,6 @@ package java.util;
  * beginning of the deque.  Stack methods are precisely equivalent to
  * {@code Deque} methods as indicated in the table below:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Comparison of Stack and Deque methods</caption>
  *  <tr>

jdk/src/share/classes/java/util/Locale.java

@@ -1248,7 +1248,7 @@ public final class Locale implements Cloneable, Serializable {
      * Returns a string representation of this <code>Locale</code>
      * object, consisting of language, country, variant, script,
      * and extensions as below:
-     * <p><blockquote>
+     * <blockquote>
      * language + "_" + country + "_" + (variant + "_#" | "#") + script + "-" + extensions
      * </blockquote>
      *
@@ -2199,7 +2199,7 @@ public final class Locale implements Cloneable, Serializable {
      * are exactly "ja", "JP", "JP" or "th", "TH", "TH" and script/extensions
      * fields are empty, this method supplies <code>UNICODE_LOCALE_EXTENSION</code>
      * "ca"/"japanese" (calendar type is "japanese") or "nu"/"thai" (number script
-     * type is "thai"). See <a href="Locale.html#special_cases_constructor"/>Special Cases</a>
+     * type is "thai"). See <a href="Locale.html#special_cases_constructor">Special Cases</a>
      * for more information.
      *
      * @return an instance of <code>Locale</code> equivalent to

jdk/src/share/classes/java/util/Properties.java

@@ -244,7 +244,6 @@ class Properties extends Hashtable<Object,Object> {
      * As an example, each of the following three lines specifies the key
      * {@code "Truth"} and the associated element value
      * {@code "Beauty"}:
-     * <p>
      * <pre>
      * Truth = Beauty
      *  Truth:Beauty
@@ -252,14 +251,12 @@ class Properties extends Hashtable<Object,Object> {
      * </pre>
      * As another example, the following three lines specify a single
      * property:
-     * <p>
      * <pre>
      * fruits                           apple, banana, pear, \
      *                                  cantaloupe, watermelon, \
      *                                  kiwi, mango
      * </pre>
      * The key is {@code "fruits"} and the associated element is:
-     * <p>
      * <pre>"apple, banana, pear, cantaloupe, watermelon, kiwi, mango"</pre>
      * Note that a space appears before each {@code \} so that a space
      * will appear after each comma in the final result; the {@code \},
@@ -268,13 +265,11 @@ class Properties extends Hashtable<Object,Object> {
      * characters.
      * <p>
      * As a third example, the line:
-     * <p>
      * <pre>cheeses
      * </pre>
      * specifies that the key is {@code "cheeses"} and the associated
-     * element is the empty string {@code ""}.<p>
+     * element is the empty string {@code ""}.
      * <p>
-     *
      * <a name="unicodeescapes"></a>
      * Characters in keys and elements can be represented in escape
      * sequences similar to those used for character and string literals

jdk/src/share/classes/java/util/PropertyPermission.java

@@ -51,11 +51,10 @@ import sun.security.util.SecurityConstants;
  * signify a wildcard match. For example: "java.*" and "*" signify a wildcard
  * match, while "*java" and "a*b" do not.
  * <P>
- * <P>
  * The actions to be granted are passed to the constructor in a string containing
  * a list of one or more comma-separated keywords. The possible keywords are
  * "read" and "write". Their meaning is defined as follows:
- * <P>
+ *
  * <DL>
  *    <DT> read
  *    <DD> read permission. Allows <code>System.getProperty</code> to
@@ -166,11 +165,11 @@ public final class PropertyPermission extends BasicPermission {
      * Checks if this PropertyPermission object "implies" the specified
      * permission.
      * <P>
-     * More specifically, this method returns true if:<p>
+     * More specifically, this method returns true if:
      * <ul>
-     * <li> <i>p</i> is an instanceof PropertyPermission,<p>
+     * <li> <i>p</i> is an instanceof PropertyPermission,
      * <li> <i>p</i>'s actions are a subset of this
-     * object's actions, and <p>
+     * object's actions, and
      * <li> <i>p</i>'s name is implied by this object's
      *      name. For example, "java.*" implies "java.home".
      * </ul>

jdk/src/share/classes/java/util/Queue.java

@@ -47,7 +47,6 @@ package java.util;
  * implementations; in most implementations, insert operations cannot
  * fail.
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Summary of Queue methods</caption>
  *  <tr>

jdk/src/share/classes/java/util/ResourceBundle.java

@@ -1084,7 +1084,6 @@ public abstract class ResourceBundle {
      * bundles. Conceptually, the bundle loading process with the given
      * <code>control</code> is performed in the following steps.
      *
-     * <p>
      * <ol>
      * <li>This factory method looks up the resource bundle in the cache for
      * the specified <code>baseName</code>, <code>targetLocale</code> and

jdk/src/share/classes/java/util/Scanner.java

@@ -216,7 +216,6 @@ import sun.misc.LRUCache;
  * are specified in terms of the following regular-expression grammar, where
  * Rmax is the highest digit in the radix being used (for example, Rmax is 9 in base 10).
  *
- * <p>
  * <dl>
  *   <dt><i>NonAsciiDigit</i>:
  *       <dd>A non-ASCII character c for which

jdk/src/share/classes/java/util/TimeZone.java

@@ -606,7 +606,7 @@ abstract public class TimeZone implements Serializable, Cloneable {
      * Otherwise, the method takes the following steps to determine the default
      * time zone.
      *
-     * <p><ul>
+     * <ul>
      * <li>Use the {@code user.timezone} property value as the default
      * time zone ID if it's available.</li>
      * <li>Detect the platform time zone ID. The source of the

jdk/src/share/classes/java/util/UUID.java

@@ -233,7 +233,7 @@ public final class UUID implements java.io.Serializable, Comparable<UUID> {
      * number describes how this {@code UUID} was generated.
      *
      * The version number has the following meaning:
-     * <p><ul>
+     * <ul>
      * <li>1    Time-based UUID
      * <li>2    DCE security UUID
      * <li>3    Name-based UUID
@@ -252,7 +252,7 @@ public final class UUID implements java.io.Serializable, Comparable<UUID> {
      * number describes the layout of the {@code UUID}.
      *
      * The variant number has the following meaning:
-     * <p><ul>
+     * <ul>
      * <li>0    Reserved for NCS backward compatibility
      * <li>2    <a href="http://www.ietf.org/rfc/rfc4122.txt">IETF&nbsp;RFC&nbsp;4122</a>
      * (Leach-Salz), used by this class

jdk/src/share/classes/java/util/concurrent/BlockingDeque.java

@@ -50,7 +50,6 @@ import java.util.*;
  * and the fourth blocks for only a given maximum time limit before giving
  * up.  These methods are summarized in the following table:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Summary of BlockingDeque methods</caption>
  *  <tr>
@@ -126,7 +125,6 @@ import java.util.*;
  * {@code BlockingQueue} interface are precisely equivalent to
  * {@code BlockingDeque} methods as indicated in the following table:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Comparison of BlockingQueue and BlockingDeque methods</caption>
  *  <tr>

jdk/src/share/classes/java/util/concurrent/BlockingQueue.java

@@ -53,7 +53,6 @@ import java.util.Queue;
  * and the fourth blocks for only a given maximum time limit before giving
  * up.  These methods are summarized in the following table:
  *
- * <p>
  * <table BORDER CELLPADDING=3 CELLSPACING=1>
  * <caption>Summary of BlockingQueue methods</caption>
  *  <tr>

jdk/src/share/classes/java/util/concurrent/Future.java

@@ -52,8 +52,8 @@ package java.util.concurrent;
  *
  * <p>
  * <b>Sample Usage</b> (Note that the following classes are all
- * made-up.) <p>
+ * made-up.)
- *  <pre> {@code
+ * <pre> {@code
  * interface ArchiveSearcher { String search(String target); }
  * class App {
  *   ExecutorService executor = ...

jdk/src/share/classes/java/util/concurrent/locks/ReentrantReadWriteLock.java

@@ -56,7 +56,6 @@ import java.util.Collection;
  * constraints.  A nonfair lock that is continuously contended may
  * indefinitely postpone one or more reader or writer threads, but
  * will normally have higher throughput than a fair lock.
- * <p>
  *
  * <dt><b><i>Fair mode</i></b>
  * <dd>When constructed as fair, threads contend for entry using an

jdk/src/share/classes/java/util/jar/Pack200.java

@@ -44,7 +44,7 @@ import java.beans.PropertyChangeListener;
  * The unpacker  engine is used by deployment applications to
  * transform the byte-stream back to JAR format.
  * <p>
- * Here is an example using  packer and unpacker:<p>
+ * Here is an example using  packer and unpacker:
  * <pre>{@code
  *    import java.util.jar.Pack200;
  *    import java.util.jar.Pack200.*;

jdk/src/share/classes/java/util/logging/Logger.java

@@ -150,7 +150,7 @@ import sun.reflect.Reflection;
  * has or inherited a resource bundle name, then that resource bundle name
  * will be mapped to a {@code ResourceBundle} object, using the default Locale
  * at the time of logging.
- * <br><a name="ResourceBundleMapping"/>When mapping resource bundle names to
+ * <br id="ResourceBundleMapping">When mapping resource bundle names to
  * {@code ResourceBundle} objects, the logger will first try to use the
  * Thread's {@linkplain java.lang.Thread#getContextClassLoader() context class
  * loader} to map the given resource bundle name to a {@code ResourceBundle}.

jdk/src/share/classes/java/util/regex/Pattern.java

@@ -618,7 +618,7 @@ import java.util.stream.StreamSupport;
  * are in conformance with the recommendation of <i>Annex C: Compatibility Properties</i>
  * of <a href="http://www.unicode.org/reports/tr18/"><i>Unicode Regular Expression
  * </i></a>, when {@link #UNICODE_CHARACTER_CLASS} flag is specified.
- * <p>
+ *
  * <table border="0" cellpadding="1" cellspacing="0"
  *  summary="predefined and posix character classes in Unicode mode">
  * <tr align="left">

jdk/src/share/classes/java/util/spi/LocaleServiceProvider.java

@@ -41,7 +41,7 @@ import java.util.Locale;
  * <code>java.util</code> packages use implementations of the provider
  * interfaces to offer support for locales beyond the set of locales
  * supported by the Java runtime environment itself.
- * <p>
+ *
  * <h3>Packaging of Locale Sensitive Service Provider Implementations</h3>
  * Implementations of these locale sensitive services are packaged using the
  * <a href="../../../../technotes/guides/extensions/index.html">Java Extension Mechanism</a>