From 7e43455ead692738a3d3408643c89c96492a014b Mon Sep 17 00:00:00 2001
From: Magnus Ihse Bursie <ihse@openjdk.org>
Date: Thu, 23 Nov 2017 13:24:40 +0100
Subject: [PATCH] 8191715: Update documentation pointing to "common" directory

Reviewed-by: erikj
---
 doc/building.html         |  4 ++--
 doc/building.md           |  8 ++++----
 make/Init.gmk             |  2 +-
 make/RunTests.gmk         |  4 ++--
 make/conf/jib-profiles.js | 10 +++++-----
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/doc/building.html b/doc/building.html
index 357b0f5fb4b..bd4c1d80ddd 100644
--- a/doc/building.html
+++ b/doc/building.html
@@ -871,9 +871,9 @@ test-support/</code></pre>
 <p>When building for distribution, <code>zipped</code> is a good solution. Binaries built with <code>internal</code> is suitable for use by developers, since they facilitate debugging, but should be stripped before distributed to end users.</p>
 <h3 id="autoconf-details">Autoconf Details</h3>
 <p>The <code>configure</code> script is based on the autoconf framework, but in some details deviate from a normal autoconf <code>configure</code> script.</p>
-<p>The <code>configure</code> script in the top level directory of OpenJDK is just a thin wrapper that calls <code>common/autoconf/configure</code>. This in turn provides functionality that is not easily expressed in the normal Autoconf framework, and then calls into the core of the <code>configure</code> script, which is the <code>common/autoconf/generated-configure.sh</code> file.</p>
+<p>The <code>configure</code> script in the top level directory of OpenJDK is just a thin wrapper that calls <code>make/autoconf/configure</code>. This in turn provides functionality that is not easily expressed in the normal Autoconf framework, and then calls into the core of the <code>configure</code> script, which is the <code>make/autoconf/generated-configure.sh</code> file.</p>
 <p>As the name implies, this file is generated by Autoconf. It is checked in after regeneration, to alleviate the common user to have to install Autoconf.</p>
-<p>The build system will detect if the Autoconf source files have changed, and will trigger a regeneration of <code>common/autoconf/generated-configure.sh</code> if needed. You can also manually request such an update by <code>bash common/autoconf/autogen.sh</code>.</p>
+<p>The build system will detect if the Autoconf source files have changed, and will trigger a regeneration of <code>make/autoconf/generated-configure.sh</code> if needed. You can also manually request such an update by <code>bash make/autoconf/autogen.sh</code>.</p>
 <p>If you make changes to the build system that requires a re-generation, note the following:</p>
 <ul>
 <li><p>You must use <em>exactly</em> version 2.69 of autoconf for your patch to be accepted. This is to avoid spurious changes in the generated file. Note that Ubuntu 16.04 ships a patched version of autoconf which claims to be 2.69, but is not.</p></li>
diff --git a/doc/building.md b/doc/building.md
index 878bdf29771..31f7d57578c 100644
--- a/doc/building.md
+++ b/doc/building.md
@@ -1660,18 +1660,18 @@ The `configure` script is based on the autoconf framework, but in some details
 deviate from a normal autoconf `configure` script.
 
 The `configure` script in the top level directory of OpenJDK is just a thin
-wrapper that calls `common/autoconf/configure`. This in turn provides
+wrapper that calls `make/autoconf/configure`. This in turn provides
 functionality that is not easily expressed in the normal Autoconf framework,
 and then calls into the core of the `configure` script, which is the
-`common/autoconf/generated-configure.sh` file.
+`make/autoconf/generated-configure.sh` file.
 
 As the name implies, this file is generated by Autoconf. It is checked in after
 regeneration, to alleviate the common user to have to install Autoconf.
 
 The build system will detect if the Autoconf source files have changed, and
-will trigger a regeneration of `common/autoconf/generated-configure.sh` if
+will trigger a regeneration of `make/autoconf/generated-configure.sh` if
 needed. You can also manually request such an update by `bash
-common/autoconf/autogen.sh`.
+make/autoconf/autogen.sh`.
 
 If you make changes to the build system that requires a re-generation, note the
 following:
diff --git a/make/Init.gmk b/make/Init.gmk
index ce3264f8900..5027dd68af9 100644
--- a/make/Init.gmk
+++ b/make/Init.gmk
@@ -329,7 +329,7 @@ else # HAS_SPEC=true
 	$(call PrintFailureReports)
 	$(call PrintBuildLogFailures)
 	$(call ReportProfileTimes)
-	$(PRINTF) "Hint: See common/doc/building.html#troubleshooting for assistance.\n\n"
+	$(PRINTF) "Hint: See doc/building.html#troubleshooting for assistance.\n\n"
         ifneq ($(COMPARE_BUILD), )
 	  $(call CleanupCompareBuild)
         endif
diff --git a/make/RunTests.gmk b/make/RunTests.gmk
index 6305a00c10b..72e6810d290 100644
--- a/make/RunTests.gmk
+++ b/make/RunTests.gmk
@@ -162,7 +162,7 @@ endef
 ifeq ($(TEST), )
   $(info No test selection given in TEST!)
   $(info Please use e.g. 'run-test TEST=tier1' or 'run-test-tier1')
-  $(info See common/doc/testing.[md|html] for help)
+  $(info See doc/testing.[md|html] for help)
   $(error Cannot continue)
 endif
 
@@ -185,7 +185,7 @@ $(foreach test, $(TEST), \
 
 ifneq ($(UNKNOWN_TEST), )
   $(info Unknown test selection: '$(UNKNOWN_TEST)')
-  $(info See common/doc/testing.[md|html] for help)
+  $(info See doc/testing.[md|html] for help)
   $(error Cannot continue)
 endif
 
diff --git a/make/conf/jib-profiles.js b/make/conf/jib-profiles.js
index 03943e2ebfc..2d03265712a 100644
--- a/make/conf/jib-profiles.js
+++ b/make/conf/jib-profiles.js
@@ -203,7 +203,7 @@ var getJibProfiles = function (input) {
     data.src_bundle_excludes = "./build webrev* */webrev* */*/webrev* */*/*/webrev* .hg */.hg */*/.hg */*/*/.hg";
     // Include list to use when creating a minimal jib source bundle which
     // contains just the jib configuration files.
-    data.conf_bundle_includes = "*/conf/jib-profiles.* common/autoconf/version-numbers"
+    data.conf_bundle_includes = "*/conf/jib-profiles.* make/autoconf/version-numbers"
 
     // Define some common values
     var common = getJibProfilesCommon(input, data);
@@ -1043,7 +1043,7 @@ var concatObjects = function (o1, o2) {
 
 /**
  * Constructs the numeric version string from reading the
- * common/autoconf/version-numbers file and removing all trailing ".0".
+ * make/autoconf/version-numbers file and removing all trailing ".0".
  *
  * @param major Override major version
  * @param minor Override minor version
@@ -1080,17 +1080,17 @@ var versionArgs = function(input, common) {
     return args;
 }
 
-// Properties representation of the common/autoconf/version-numbers file. Lazily
+// Properties representation of the make/autoconf/version-numbers file. Lazily
 // initiated by the function below.
 var version_numbers;
 
 /**
- * Read the common/autoconf/version-numbers file into a Properties object.
+ * Read the make/autoconf/version-numbers file into a Properties object.
  *
  * @returns {java.utilProperties}
  */
 var getVersionNumbers = function () {
-    // Read version information from common/autoconf/version-numbers
+    // Read version information from make/autoconf/version-numbers
     if (version_numbers == null) {
         version_numbers = new java.util.Properties();
         var stream = new java.io.FileInputStream(__DIR__ + "/../autoconf/version-numbers");