# # Copyright (c) 2011, 2024, Oracle and/or its affiliates. All rights reserved. # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # # This code is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License version 2 only, as # published by the Free Software Foundation. Oracle designates this # particular file as subject to the "Classpath" exception as provided # by Oracle in the LICENSE file that accompanied this code. # # This code is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # version 2 for more details (a copy is included in the LICENSE file that # accompanied this code). # # You should have received a copy of the GNU General Public License version # 2 along with this work; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. # # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA # or visit www.oracle.com if you need additional information or have any # questions. # ################################################################################ # This file contains helper functions for Init.gmk. # It is divided in two parts, depending on if a SPEC is present or not # (HAS_SPEC is true or not). ################################################################################ ifndef _INITSUPPORT_GMK _INITSUPPORT_GMK := 1 ifeq ($(HAS_SPEC), ) # COMMA is defined in spec.gmk, but that is not included yet COMMA := , # Include the corresponding closed file, if present. ifneq ($(CUSTOM_MAKE_DIR), ) -include $(CUSTOM_MAKE_DIR)/InitSupport.gmk endif ############################################################################## # Helper functions for the initial part of Init.gmk, before the spec file is # loaded. Most of these functions provide parsing and setting up make options # from the command-line. ############################################################################## # Make control variables, handled by Init.gmk INIT_CONTROL_VARIABLES += LOG CONF CONF_NAME SPEC JOBS TEST_JOBS CONF_CHECK \ COMPARE_BUILD JTREG GTEST MICRO TEST_OPTS TEST_VM_OPTS TEST_DEPS # All known make control variables MAKE_CONTROL_VARIABLES := $(INIT_CONTROL_VARIABLES) TEST JDK_FILTER SPEC_FILTER # Define a simple reverse function. # Should maybe move to MakeBase.gmk, but we can't include that file now. reverse = \ $(if $(strip $(1)), $(call reverse, $(wordlist 2, $(words $(1)), $(1)))) \ $(firstword $(1)) # The variable MAKEOVERRIDES contains variable assignments from the command # line, but in reverse order to what the user entered. # The '§' <=> '\ 'dance is needed to keep values with space in them connected. COMMAND_LINE_VARIABLES := $(subst §,\ , $(call reverse, $(subst \ ,§,$(MAKEOVERRIDES)))) # A list like FOO="val1" BAR="val2" containing all user-supplied make # variables that we should propagate. # The '§' <=> '\ 'dance is needed to keep values with space in them connected. USER_MAKE_VARS := $(subst §,\ , $(filter-out $(addsuffix =%, $(INIT_CONTROL_VARIABLES)), \ $(subst \ ,§,$(MAKEOVERRIDES)))) # Setup information about available configurations, if any. ifneq ($(CUSTOM_ROOT), ) build_dir = $(CUSTOM_ROOT)/build else build_dir = $(topdir)/build endif all_spec_files = $(wildcard $(build_dir)/*/spec.gmk) # Extract the configuration names from the path all_confs = $(patsubst %/spec.gmk, %, $(patsubst $(build_dir)/%, %, $(all_spec_files))) # Check for unknown command-line variables define CheckControlVariables command_line_variables := $$(strip $$(foreach var, \ $$(subst \ ,_,$$(MAKEOVERRIDES)), \ $$(firstword $$(subst =, , $$(var))))) unknown_command_line_variables := $$(strip \ $$(filter-out $$(MAKE_CONTROL_VARIABLES), $$(command_line_variables))) ifneq ($$(unknown_command_line_variables), ) $$(info Note: Command line contains non-control variables:) $$(foreach var, $$(unknown_command_line_variables), $$(info * $$(var)=$$($$(var)))) $$(info Make sure it is not mistyped, and that you intend to override this variable.) $$(info 'make help' will list known control variables.) $$(info ) endif endef # Check for deprecated ALT_ variables define CheckDeprecatedEnvironment defined_alt_variables := $$(filter ALT_%, $$(.VARIABLES)) ifneq ($$(defined_alt_variables), ) $$(info Warning: You have the following ALT_ variables set:) $$(foreach var, $$(defined_alt_variables), $$(info * $$(var)=$$($$(var)))) $$(info ALT_ variables are deprecated, and may result in a failed build.) $$(info Please clean your environment.) $$(info ) endif endef # Check for invalid make flags like -j define CheckInvalidMakeFlags # This is a trick to get this rule to execute before any other rules # MAKEFLAGS only indicate -j if read in a recipe (!) $$(topdir)/make/Init.gmk: .FORCE $$(if $$(findstring --jobserver, $$(MAKEFLAGS)), \ $$(info Error: 'make -jN' is not supported, use 'make JOBS=N') \ $$(error Cannot continue) \ ) .FORCE: .PHONY: .FORCE endef # Check that the CONF_CHECK option is valid and set up handling define ParseConfCheckOption ifeq ($$(CONF_CHECK), ) # Default behavior is fail CONF_CHECK := fail else ifneq ($$(filter-out auto fail ignore, $$(CONF_CHECK)), ) $$(info Error: CONF_CHECK must be one of: auto, fail or ignore.) $$(error Cannot continue) endif endef define ParseConfAndSpec ifneq ($$(origin SPEC), undefined) # We have been given a SPEC, check that it works out properly ifneq ($$(origin CONF), undefined) # We also have a CONF argument. We can't have both. $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.) $$(error Cannot continue) endif ifneq ($$(origin CONF_NAME), undefined) # We also have a CONF_NAME argument. We can't have both. $$(info Error: Cannot use CONF_NAME=$$(CONF_NAME) and SPEC=$$(SPEC) at the same time. Choose one.) $$(error Cannot continue) endif ifeq ($$(wildcard $$(SPEC)), ) $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).) $$(error Cannot continue) endif ifeq ($$(filter /%, $$(SPEC)), ) # If given with relative path, make it absolute SPECS := $$(CURDIR)/$$(strip $$(SPEC)) else SPECS := $$(SPEC) endif # For now, unset this SPEC variable. override SPEC := else # Use spec.gmk files in the build output directory ifeq ($$(all_spec_files), ) ifneq ($(CUSTOM_ROOT), ) $$(info Error: No configurations found for $$(CUSTOM_ROOT).) else $$(info Error: No configurations found for $$(topdir).) endif $$(info Please run 'bash configure' to create a configuration.) $$(info ) $$(error Cannot continue) endif ifneq ($$(origin CONF_NAME), undefined) ifneq ($$(origin CONF), undefined) # We also have a CONF argument. We can't have both. $$(info Error: Cannot use CONF=$$(CONF) and CONF_NAME=$$(CONF_NAME) at the same time. Choose one.) $$(error Cannot continue) endif matching_conf := $$(strip $$(filter $$(CONF_NAME), $$(all_confs))) ifeq ($$(matching_conf), ) $$(info Error: No configurations found matching CONF_NAME=$$(CONF_NAME).) $$(info Available configurations in $$(build_dir):) $$(foreach var, $$(all_confs), $$(info * $$(var))) $$(error Cannot continue) else ifneq ($$(words $$(matching_conf)), 1) $$(info Error: Matching more than one configuration CONF_NAME=$$(CONF_NAME).) $$(info Available configurations in $$(build_dir):) $$(foreach var, $$(all_confs), $$(info * $$(var))) $$(error Cannot continue) else $$(info Building configuration '$$(matching_conf)' (matching CONF_NAME=$$(CONF_NAME))) endif # Create a SPEC definition. This will contain the path to exactly one spec file. SPECS := $$(build_dir)/$$(matching_conf)/spec.gmk else ifneq ($$(origin CONF), undefined) # User have given a CONF= argument. ifeq ($$(CONF), ) # If given CONF=, match all configurations matching_confs := $$(strip $$(all_confs)) else # Otherwise select those that contain the given CONF string ifeq ($$(patsubst !%,,$$(CONF)), ) # A CONF starting with ! means we should negate the search term matching_confs := $$(strip $$(foreach var, $$(all_confs), \ $$(if $$(findstring $$(subst !,,$$(CONF)), $$(var)), ,$$(var)))) else matching_confs := $$(strip $$(foreach var, $$(all_confs), \ $$(if $$(findstring $$(CONF), $$(var)), $$(var)))) endif ifneq ($$(filter $$(CONF), $$(matching_confs)), ) # If we found an exact match, use that matching_confs := $$(CONF) # Don't repeat this output on make restarts caused by including # generated files. ifeq ($$(MAKE_RESTARTS), ) $$(info Using exact match for CONF=$$(CONF) (other matches are possible)) endif endif endif ifeq ($$(matching_confs), ) $$(info Error: No configurations found matching CONF=$$(CONF).) $$(info Available configurations in $$(build_dir):) $$(foreach var, $$(all_confs), $$(info * $$(var))) $$(error Cannot continue) else # Don't repeat this output on make restarts caused by including # generated files. ifeq ($$(MAKE_RESTARTS), ) ifeq ($$(words $$(matching_confs)), 1) ifneq ($$(findstring $$(LOG_LEVEL), info debug trace), ) $$(info Building configuration '$$(matching_confs)' (matching CONF=$$(CONF))) endif else $$(info Building these configurations (matching CONF=$$(CONF)):) $$(foreach var, $$(matching_confs), $$(info * $$(var))) endif endif endif # Create a SPEC definition. This will contain the path to one or more spec.gmk files. SPECS := $$(addsuffix /spec.gmk, $$(addprefix $$(build_dir)/, $$(matching_confs))) else # No CONF or SPEC given, check the available configurations ifneq ($$(words $$(all_spec_files)), 1) $$(info Error: No CONF given, but more than one configuration found.) $$(info Available configurations in $$(build_dir):) $$(foreach var, $$(all_confs), $$(info * $$(var))) $$(info Please retry building with CONF= (or SPEC=).) $$(info ) $$(error Cannot continue) endif # We found exactly one configuration, use it SPECS := $$(strip $$(all_spec_files)) endif endif endef # Extract main targets from Main.gmk using the spec provided in $2. # # Param 1: FORCE = force generation of main-targets.gmk or LAZY = do not force. # Param 2: The SPEC file to use. define DefineMainTargets # We will start by making sure the main-targets.gmk file is removed, if # make has not been restarted. By the -include, we will trigger the # rule for generating the file (which is never there since we removed it), # thus generating it fresh, and make will restart, incrementing the restart # count. main_targets_file := $$(dir $(strip $2))make-support/main-targets.gmk ifeq ($$(MAKE_RESTARTS), ) # Only do this if make has not been restarted, and if we do not force it. ifeq ($(strip $1), FORCE) $$(shell rm -f $$(main_targets_file)) endif endif $$(main_targets_file): @( cd $$(topdir) && \ $$(MAKE) $$(MAKE_LOG_FLAGS) -r -R -f $$(topdir)/make/Main.gmk \ -I $$(topdir)/make/common SPEC=$(strip $2) NO_RECIPES=true \ $$(MAKE_LOG_VARS) \ create-main-targets-include ) # Now include main-targets.gmk. This will define ALL_MAIN_TARGETS. -include $$(main_targets_file) endef define PrintConfCheckFailed @echo ' ' @echo "Please rerun configure! Easiest way to do this is by running" @echo "'make reconfigure'." @echo "This behavior may also be changed using CONF_CHECK=." @echo ' ' endef else # $(HAS_SPEC)=true ############################################################################## # Helper functions for the 'main' target. These functions assume a single, # proper and existing SPEC is included. ############################################################################## include $(TOPDIR)/make/common/MakeBase.gmk # Define basic logging setup BUILD_LOG := $(OUTPUTDIR)/build.log BUILD_PROFILE_LOG := $(OUTPUTDIR)/build-profile.log BUILD_LOG_PIPE := > >($(TEE) -a $(BUILD_LOG)) 2> >($(TEE) -a $(BUILD_LOG) >&2) && wait # Use this for simple echo/printf commands that are never expected to print # to stderr. BUILD_LOG_PIPE_SIMPLE := | $(TEE) -a $(BUILD_LOG) ifneq ($(CUSTOM_ROOT), ) topdir = $(CUSTOM_ROOT) else topdir = $(TOPDIR) endif # Setup the build environment to match the requested specification on # level of reproducible builds define SetupReproducibleBuild ifeq ($$(SOURCE_DATE), updated) # For static values of SOURCE_DATE (not "updated"), these are set in spec.gmk export SOURCE_DATE_EPOCH := $$(shell $$(DATE) +"%s") export SOURCE_DATE_ISO_8601 := $$(call EpochToISO8601, $$(SOURCE_DATE_EPOCH)) endif endef # Parse COMPARE_BUILD into COMPARE_BUILD_* # Syntax: COMPARE_BUILD=CONF=:PATCH=: # MAKE=:COMP_OPTS=: # COMP_DIR=|: # FAIL= # If neither CONF or PATCH is given, assume means CONF if it # begins with "--", otherwise assume it means PATCH. # MAKE and COMP_OPTS can only be used with CONF and/or PATCH specified. # If any value contains "+", it will be replaced by space. # FAIL can be set to false to have the return value of compare be ignored. define ParseCompareBuild ifneq ($$(COMPARE_BUILD), ) COMPARE_BUILD_OUTPUTDIR := $(topdir)/build/compare-build/$(CONF_NAME) COMPARE_BUILD_FAIL := true ifneq ($$(findstring :, $$(COMPARE_BUILD)), ) $$(foreach part, $$(subst :, , $$(COMPARE_BUILD)), \ $$(if $$(filter PATCH=%, $$(part)), \ $$(eval COMPARE_BUILD_PATCH = $$(strip $$(patsubst PATCH=%, %, $$(part)))) \ ) \ $$(if $$(filter CONF=%, $$(part)), \ $$(eval COMPARE_BUILD_CONF = $$(strip $$(subst +, , $$(patsubst CONF=%, %, $$(part))))) \ ) \ $$(if $$(filter MAKE=%, $$(part)), \ $$(eval COMPARE_BUILD_MAKE = $$(strip $$(subst +, , $$(patsubst MAKE=%, %, $$(part))))) \ ) \ $$(if $$(filter COMP_OPTS=%, $$(part)), \ $$(eval COMPARE_BUILD_COMP_OPTS = $$(strip $$(subst +, , $$(patsubst COMP_OPTS=%, %, $$(part))))) \ ) \ $$(if $$(filter COMP_DIR=%, $$(part)), \ $$(eval COMPARE_BUILD_COMP_DIR = $$(strip $$(subst +, , $$(patsubst COMP_DIR=%, %, $$(part))))) \ ) \ $$(if $$(filter FAIL=%, $$(part)), \ $$(eval COMPARE_BUILD_FAIL = $$(strip $$(subst +, , $$(patsubst FAIL=%, %, $$(part))))) \ ) \ $$(if $$(filter NODRYRUN=%, $$(part)), \ $$(eval COMPARE_BUILD_NODRYRUN = $$(strip $$(subst +, , $$(patsubst NODRYRUN=%, %, $$(part))))) \ ) \ ) else # Separate handling for single field case, to allow for spaces in values. ifneq ($$(filter PATCH=%, $$(COMPARE_BUILD)), ) COMPARE_BUILD_PATCH = $$(strip $$(patsubst PATCH=%, %, $$(COMPARE_BUILD))) else ifneq ($$(filter CONF=%, $$(COMPARE_BUILD)), ) COMPARE_BUILD_CONF = $$(strip $$(subst +, , $$(patsubst CONF=%, %, $$(COMPARE_BUILD)))) else ifneq ($$(filter --%, $$(COMPARE_BUILD)), ) # Assume CONF if value begins with -- COMPARE_BUILD_CONF = $$(strip $$(subst +, , $$(COMPARE_BUILD))) else # Otherwise assume patch file COMPARE_BUILD_PATCH = $$(strip $$(COMPARE_BUILD)) endif endif ifneq ($$(COMPARE_BUILD_PATCH), ) ifneq ($$(wildcard $$(topdir)/$$(COMPARE_BUILD_PATCH)), ) # Assume relative path, if file exists COMPARE_BUILD_PATCH := $$(wildcard $$(topdir)/$$(COMPARE_BUILD_PATCH)) else ifeq ($$(wildcard $$(COMPARE_BUILD_PATCH)), ) $$(error Patch file $$(COMPARE_BUILD_PATCH) does not exist) endif ifneq ($$(COMPARE_BUILD_NODRYRUN), true) PATCH_DRY_RUN := $$(shell cd $$(topdir) && $$(PATCH) --dry-run -p1 < $$(COMPARE_BUILD_PATCH) > /dev/null 2>&1 || $$(ECHO) FAILED) ifeq ($$(PATCH_DRY_RUN), FAILED) $$(error Patch file $$(COMPARE_BUILD_PATCH) does not apply cleanly) endif endif endif ifneq ($$(COMPARE_BUILD_FAIL), true) COMPARE_BUILD_IGNORE_RESULT := || true endif endif endef # Prepare for a comparison rebuild define PrepareCompareBuild $(ECHO) "Preparing for comparison rebuild" # Apply patch, if any $(if $(COMPARE_BUILD_PATCH), cd $(topdir) && $(PATCH) -p1 < $(COMPARE_BUILD_PATCH)) # Move the first build away temporarily $(RM) -r $(topdir)/build/.compare-build-temp $(MKDIR) -p $(topdir)/build/.compare-build-temp $(MV) $(OUTPUTDIR) $(topdir)/build/.compare-build-temp # Restore an old compare-build, or create a new compare-build directory. if test -d $(COMPARE_BUILD_OUTPUTDIR); then \ $(MV) $(COMPARE_BUILD_OUTPUTDIR) $(OUTPUTDIR); \ else \ $(MKDIR) -p $(OUTPUTDIR); \ fi # Re-run configure with the same arguments (and possibly some additional), # must be done after patching. ( cd $(CONFIGURE_START_DIR) && PATH="$(ORIGINAL_PATH)" \ $(BASH) $(topdir)/configure $(CONFIGURE_COMMAND_LINE) $(COMPARE_BUILD_CONF)) endef # Cleanup after a compare build define CleanupCompareBuild # If running with a COMPARE_BUILD patch, reverse-apply it, but continue # even if that fails (can happen with removed files). $(if $(COMPARE_BUILD_PATCH), cd $(topdir) && $(PATCH) -R -p1 < $(COMPARE_BUILD_PATCH) || true) # Move this build away and restore the original build $(MKDIR) -p $(topdir)/build/compare-build $(MV) $(OUTPUTDIR) $(COMPARE_BUILD_OUTPUTDIR) $(MV) $(topdir)/build/.compare-build-temp/$(CONF_NAME) $(OUTPUTDIR) $(RM) -r $(topdir)/build/.compare-build-temp endef # Do the actual comparison of two builds define CompareBuildDoComparison # Compare first and second build. Ignore any error code from compare.sh. $(ECHO) "Comparing between comparison rebuild (this/new) and baseline (other/old)" $(if $(COMPARE_BUILD_COMP_DIR), \ +(cd $(COMPARE_BUILD_OUTPUTDIR) && ./compare.sh --diffs $(COMPARE_BUILD_COMP_OPTS) \ -2dirs $(COMPARE_BUILD_OUTPUTDIR)/$(COMPARE_BUILD_COMP_DIR) \ $(OUTPUTDIR)/$(COMPARE_BUILD_COMP_DIR) $(COMPARE_BUILD_IGNORE_RESULT)), \ +(cd $(COMPARE_BUILD_OUTPUTDIR) && ./compare.sh --diffs $(COMPARE_BUILD_COMP_OPTS) \ -o $(OUTPUTDIR) $(COMPARE_BUILD_IGNORE_RESULT)) \ ) endef define PrintFailureReports $(if $(filter none, $(LOG_REPORT)), , \ $(RM) $(MAKESUPPORT_OUTPUTDIR)/failure-summary.log ; \ $(if $(wildcard $(MAKESUPPORT_OUTPUTDIR)/failure-logs/*.log), \ ( \ $(PRINTF) "\n=== Output from failing command(s) repeated here ===\n" ; \ $(foreach logfile, $(sort $(wildcard $(MAKESUPPORT_OUTPUTDIR)/failure-logs/*.log)), \ $(PRINTF) "* For target $(notdir $(basename $(logfile))):\n" ; \ $(if $(filter all, $(LOG_REPORT)), \ $(GREP) -v -e "^Note: including file:" < $(logfile) || true ; \ , \ ($(GREP) -v -e "^Note: including file:" < $(logfile) || true) | $(HEAD) -n 15 ; \ if test `$(WC) -l < $(logfile)` -gt 15; then \ $(ECHO) " ... (rest of output omitted)" ; \ fi ; \ ) \ ) \ $(PRINTF) "\n* All command lines available in $(MAKESUPPORT_OUTPUTDIR)/failure-logs.\n" ; \ $(PRINTF) "=== End of repeated output ===\n" ; \ ) >> $(MAKESUPPORT_OUTPUTDIR)/failure-summary.log \ ) \ ) endef define PrintBuildLogFailures $(if $(filter none, $(LOG_REPORT)), , \ if $(GREP) -q "recipe for target .* failed" $(BUILD_LOG) 2> /dev/null; then \ $(PRINTF) "\n=== Make failed targets repeated here ===\n" ; \ $(GREP) "recipe for target .* failed" $(BUILD_LOG) ; \ $(PRINTF) "=== End of repeated output ===\n" ; \ $(PRINTF) "\nHELP: Try searching the build log for the name of the first failed target.\n" ; \ else \ $(PRINTF) "\nNo indication of failed target found.\n" ; \ $(PRINTF) "HELP: Try searching the build log for '] Error'.\n" ; \ fi >> $(MAKESUPPORT_OUTPUTDIR)/failure-summary.log ; \ $(CAT) $(MAKESUPPORT_OUTPUTDIR)/failure-summary.log \ ) endef define RotateLogFiles $(RM) $(BUILD_LOG).old 2> /dev/null && \ $(MV) $(BUILD_LOG) $(BUILD_LOG).old 2> /dev/null || true $(if $(findstring true, $(LOG_PROFILE_TIMES_FILE)), \ $(RM) $(BUILD_PROFILE_LOG).old 2> /dev/null && \ $(MV) $(BUILD_PROFILE_LOG) $(BUILD_PROFILE_LOG).old 2> /dev/null || true \ ) endef # Failure logs are only supported for "parallel" main targets, not the # (trivial) sequential make targets (such as clean and reconfigure), # since the failure-logs directory creation will conflict with clean. # We also make sure the javatmp directory exists, which is needed if a java # process (like javac) is using java.io.tmpdir. define PrepareFailureLogs $(RM) -r $(MAKESUPPORT_OUTPUTDIR)/failure-logs 2> /dev/null && \ $(MKDIR) -p $(MAKESUPPORT_OUTPUTDIR)/failure-logs $(MKDIR) -p $(JAVA_TMP_DIR) $(RM) $(MAKESUPPORT_OUTPUTDIR)/exit-with-error 2> /dev/null endef # Remove any javac server logs and port files. This # prevents a new make run to reuse the previous servers. define PrepareJavacServer $(if $(JAVAC_SERVER_DIR), \ $(RM) -r $(JAVAC_SERVER_DIR) 2> /dev/null && \ $(MKDIR) -p $(JAVAC_SERVER_DIR) \ ) endef define CleanupJavacServer [ -f $(JAVAC_SERVER_DIR)/server.port ] && $(ECHO) Stopping javac server && \ $(TOUCH) $(JAVAC_SERVER_DIR)/server.port.stop; true endef ifeq ($(call isBuildOs, windows), true) # On windows we need to synchronize with the javac server to be able to # move or remove the build output directory. Since we have no proper # synchronization process, wait for a while and hope it helps. This is only # used by build comparisons. define WaitForJavacServerFinish $(if $(JAVAC_SERVER_DIR), \ sleep 5 \ ) endef else define WaitForJavacServerFinish endef endif ############################################################################## # Functions for timers ############################################################################## # Store the build times in this directory. BUILDTIMESDIR = $(OUTPUTDIR)/make-support/build-times # Record starting time for build of a sub repository. define RecordStartTime $(DATE) '+%Y %m %d %H %M %S' | $(AWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$(strip $1) && \ $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)_human_readable endef # Record ending time and calculate the difference and store it in a # easy to read format. Handles builds that cross midnight. Expects # that a build will never take 24 hours or more. define RecordEndTime $(DATE) '+%Y %m %d %H %M %S' | $(AWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$(strip $1) $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)_human_readable $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$(strip $1)` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$(strip $1)` $1 | \ $(AWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \ M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \ > $(BUILDTIMESDIR)/build_time_diff_$(strip $1) endef define StartGlobalTimer $(RM) -r $(BUILDTIMESDIR) 2> /dev/null && \ $(MKDIR) -p $(BUILDTIMESDIR) && \ $(call RecordStartTime,TOTAL) endef define StopGlobalTimer $(call RecordEndTime,TOTAL) endef # Find all build_time_* files and print their contents in a list sorted # on the name of the sub repository. define ReportBuildTimes $(PRINTF) $(LOG_INFO) -- \ "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \ "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \ "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \ "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | \ $(XARGS) $(CAT) | $(SORT) -k 2`" \ "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`" \ $(BUILD_LOG_PIPE_SIMPLE) endef define ReportProfileTimes $(if $(findstring true, $(LOG_PROFILE_TIMES_LOG)), \ [ ! -f $(BUILD_PROFILE_LOG) ] || \ { $(ECHO) Begin $(notdir $(BUILD_PROFILE_LOG)) && \ $(CAT) $(BUILD_PROFILE_LOG) && \ $(ECHO) End $(notdir $(BUILD_PROFILE_LOG)); \ } \ $(BUILD_LOG_PIPE_SIMPLE) ) endef endif # HAS_SPEC # Look for a given option in the LOG variable, and if found, set a variable # and remove the option from the LOG variable # $1: The option to look for # $2: The variable to set to "true" if the option is found define ParseLogOption ifneq ($$(findstring $1, $$(LOG)), ) override $2 := true # First try to remove ",